- Duration: 12 Days
Course details
In today's highly competitive marketplace, it is more important than ever that production plant operates in a safe and reliable way. Unscheduled outages caused by plant breakdown can be very costly and engineers must use every possible means at their disposal to maximise plant reliability and performance.
Predictive maintenance, which incorporates condition based maintenance, is a vitally important technical approach to the maintenance of rotating and reciprocating machines. Sadly, however, many organisations never manage to achieve high performance in this field because they are not able to deal with the complexities associated with the most powerful and important condition-based maintenance technique, which is vibration monitoring.
Vibration monitoring and analysis is still seen by many engineers as less than mainstream. It has a mixed reputation in terms of its capabilities and usefulness, and there are also many false rumours associated with its applicability (or otherwise). Yet, if vibration monitoring and analysis is properly understood and implemented, it offers the opportunity to make very significant improvements in plant reliability. It is arguably the single largest missed opportunity in typical technical maintenance systems.
The programme also addresses the closely related subject of balancing of rotating machinery. Whether it is needed as a corrective action or during the (re-)installation of a machine, achieving high quality balance is vitally important to the long term reliability and overall lifetime of plant.
PROGRAMME OBJECTIVES
- A detailed understanding of the measurement and characteristics of vibration signals, and the ways in which vibration data can be stored and represented
- A comprehensive knowledge of vibration-based fault detection and diagnostic techniques, and the practical implementation of these techniques
- The knowledge to assess accurately machinery conditions, and to make detailed and reliable diagnoses for a range of common machinery and component types
- A good understanding of the principles and practice of the balancing of routine rotating machines
- The knowledge about how to use vibration based methods to achieve high quality balance on routine rotating machinery. Note that the balancing of flexible rotor machines such as steam / gas turbines and axial compressors is a highly specialist activity and is NOT included within the scope of this programme
- A clear understanding of why vibration monitoring systems and approaches often lead to disappointing results and how these pitfalls can be avoided
- The ability to specify, implement and operate a highly capable vibration-based condition monitoring system within their own companies
TRAINING METHODOLOGY
This programme is a combination of instructor-led topic areas and computer-based analysis and modelling. Delegates will learn in detail about, and practice using, best-of-breed approaches to vibration monitoring, vibration analysis and the balancing of machinery. Ample opportunity will be given for delegates to ask lots of questions about how best to apply vibration monitoring and balancing techniques in their own organisations. The programme delivers a comprehensive practically-based approach to vibration monitoring and analysis, including the use of vibration monitoring in machinery balancing applications, and delegates will discuss these concepts and have extensive opportunities to see them being applied to a wide range of real-world case studies.
PROGRAMME SUMMARY
The purpose of this programme is to explain precisely how vibration monitoring and analysis should be performed, and to demonstrate exactly how it can be used to make significant increases in the improvement of plant reliability and performance.
The programme gives a detailed treatment of the detection, location and diagnosis of faults in rotating and reciprocating machinery, using vibration analysis.
The act of balancing a machine can be performed with the rotor either in situ or transported to a specialists balancing machine. Either approach requires that vibration is monitored on the bearings at each end of the rotor, and thereafter that calculations are performance to establish the mass changes that need to be made to achieve the desired balance quality. Both approaches are covered in detail by the programme.
PROGRAMME OUTLINE
Vibration and its measurment
- Components of a vibration signal
- Vibration transducers
- Overall and spectral vibration
- Monitoring point location
- Transducer mounting
- Common symptoms
- Time and frequency domains
- Frequency domain instrumentation
- Fast Fourier transforms
- Displacement and proximity probes
- Transducer selection, calibration, care and maintenance
Vibration symptoms of common machine faults
- Imbalance issues
- Looseness issues
- Signal distortion
- Harmonic content
- Inter-harmonics
- Misalignment
- Distinction between angular and lateral effects
- Vibration level classification
- ISO standards
- Peak and RMS levels
- Dynamic range
- Use of FFT analysers
- Constant percentage bandwidth spectra
- Automated CPB spectrum comparison
- Spectral zoom
- Case studies
Balance problems and vibration based balance correction
- Rigid rotor and flexible rotor machines
- Static and dynamic balancing of rigid rotors
- Balance quality
- Residual imbalance
- Types of imbalance
- In situ balancing
- The use of balancing machines
- Measurement set-ups
- Rules on thumb for trial mass location
- Single plane balancing
- Two-plane balance procedures
- Why you have to be a specialist to balance flexible rotor machines
- Case studies
Fundamentals of bearing and gear vibration
- Bearing problems calculation of bearing frequencies
- Pulse trains and line spectra
- Loaded element modulation
- Trending fault development and predicting remaining useful life (RUF)
- Gear problems
- Gear wear
- Toothmesh harmonics
- Ghost components
- Gear fatigue
- Modulation effects
- Bent shafts and gear misalignment
- Case studies
Vibration based fault diagnosis
- Time domain averaging
- Crest factor
- Sampling, digitising and aliasing
- Frequency and phase response
- Band selectable analysis (BSA)
- RMS and linear averaging
- Real time bandwidth and dynamic range
- Case studies
- What vibration monitoring CANNOT do
- Overall review of concepts learned and how they can be applied in practice
Course Location
About PetroTech
Knowledge
The adage that “knowledge” is power holds very true in this industry. In order to maximize results we are constantly updating and upgrading ourselves. This commitment to ongoing skills development is one of the reasons we are success, the belief that there is a “better way to do things” is what motivates us each and every day. By aligning with us you are going to benefit from our years of expertise in real world scenarios. Classroom learning is great but there is no substitute to real world experience which is what we are bringing to the table.
Quality
Billionaire investor Warren Buffett said “price is what you pay but quality is what you get” and that expression is very true. With use we understand that your time is very valuable and you only want the best and most current industry related knowledge which is what we bring to the table. Instead of giving you massive amounts of inaccurate or outdated information you get precisely what you want, the most current knowledge so you can make truly informed decisions that will directly impact productivity and your bottom line. When results are what you are looking for then the choice is clear, we are your partners in success.
Innovation
Technology has revolutionized the way knowledge is disseminated in throughout the world, what use to take months or even years to reach the masses can be done in a few hours ! In order to remain relevant and viable we need to embrace innovations. The challenge with innovation is knowing when to implement it and what type of return you can expect from it. Instead of risking your time and resources we have the answers for you, Since we are at the vanguard of the industry whenever there is a fruitful innovation we will be there providing you with the information needed to make the right decision.
Respect
We understand you may have unique need so we provide a tailored made (bespoke for our U.K. friends) approach that will address your questions in the most conducive manner possible. Respect to us means putting your interests, your needs at the forefront of our mind. You will see how genuine we are and that you not just “some customer” you are our partner in success just as much as we are your partner in success. We firmly believe in the “golden rule”, treat others with graciousness, courtesy and respect. Come experience the difference that quality and respect makes and you will truly be amazed.
General Management Related Questions
- Business Improvement Academy for Health & FitnessAED 46Duration: Upto 4 Hours
- Business Administration Course Oxford Home Study CollegeAED 252
AED 2,828Duration: 200 Hours
