Price: USD 25
USD 125
- Duration: Upto 12 Hours
Course details
"Ultimate Wind Energy Course for Electrical Engineering"The only course out there with everything you need to know about Wind Energy from A to Z
Throughout the course, you will learn:
- Types of wind turbines.
- Rotor solidity and selection of the number of rotor blades.
- Gearbox in wind turbines.
- The power extracted by the turbine from the wind.
- Betz limit and maximum rotor efficiency.
- Factors affecting wind speed and density.
- Applied force on the wind turbine, torque coefficient, and the importance of the TSR.
- Wind turbine generator characteristics.
- Effect of the rotor diameter and generator size on power.
- Wind turbines spacing.
- Wind farm feasibility study.
- Weibull and Rayleigh probability density functions.
- Determination of Weibull parameters.
- Determination of Weibull parameters using the graphical method.
- Aerodynamics of wind turbines.
- Pitch-controlled wind turbines.
- Passive stall-controlled wind turbines.
- Active stall-controlled wind turbines.
- Maximum power point tracking in wind turbines.
- Tip speed ratio (TSR) control.
- Optimal torque control (OT) MPPT algorithm.
- Power signal feedback (PSF) control.
- Perturbation and observation (P&O) or hill-climb searching (HCS).
- Electricity generation using wind turbines.
- Permanent magnet synchronous generator (PMSG).
- Wound rotor synchronous generator (WRSG).
- Doubly-fed induction generator (DFIG).
- Brushless permanent magnet DC generator (PMDC).
- Squirrel-cage induction generator.
- Wound rotor induction generator.
- Tubular steel wind turbine tower.
- Lattice wind turbine tower.
- Concrete wind turbine tower.
- Hybrid wind turbine tower.
- Brakes in the wind turbine.
- Rotor brakes in the wind turbine.
- Pitch drive or aerodynamic brakes in the wind turbine.
- Simulation of a wind turbine system using the ETAP program.
- MATLAB simulation of the wind turbine.
- Cp plotting and lookup table in MATLAB.
- MPPT in MATLAB Simulink.
After Taking This Course, You Will Be Able To
- Understand everything about wind energy systems, such as the basic components, factors affecting wind generation, the different probability distribution functions used to represent wind data, and wind feasibility study.
- Understand different control systems used in the wind turbine and the types of electrical generators utilized.
- You will be able to simulate the wind turbine system in both ETAP and MATLAB programs.
Bonus Gift:
You will also get the slides for the Wind Energy Course for those who are interested in them or have them as a revision for themselves
- 231 Pages of Wind Energy Course Slides.
Take this course if you've been looking for ONE COURSE with in-depth insight into Wind Energy. Updated on 04 October, 2024
Eligibility / Requirements
No prior experience is required to take this course.
Job roles this course is suitable for:
Wind engineer , Principal Wind Engineer , Electrical Engineer , Renewable Energy ConsultantAbout Khadija Academy
Khadija Academy was founded by engineer Ahmed Mahdy who is an electrical power engineer and researcher. He is also an electrical bestselling instructor at more than 30 platforms, teaching electrical engineering, and has helped more than 80,000 students from 198 countries achieve career success with simple and easy courses in the last 8 years.In 2018, he was nominated among the top 10% of instructors on Udemy, besides currently ranking among the top instructors in the engineering sector of Udemy.
He also received the award for the best master's thesis in the Faculty of Engineering - Ain Shams University for 2022/2023.
Some of his published research works in the top electrical engineering journals worldwide:
1- Transient stability improvement of wave energy conversion systems connected to the power grid using anti-windup-coot optimization strategy - Energy Journal - Impact Factor of 9.0.
https://www.sciencedirect.com/science/article/abs/pii/S0360544222002249
2- Nonlinear Modeling and Real-Time Simulation of a Grid-Connected AWS Wave Energy Conversion System - IEEE Transactions on Sustainable Energy - Impact Factor of 8.8.
https://ieeexplore.ieee.org/document/9772340
3- Modeling and optimal operation of hybrid wave energy and PV system feeding supercharging stations based on golden jackal optimal control strategy - Energy Journal - Impact Factor of 9.0.
https://www.sciencedirect.com/science/article/abs/pii/S0360544222028183?via%3Dihub
4- State-of-the-Art of the most commonly adopted wave energy conversion systems - Ain Shams Engineering Journal - Impact Factor of 6.0.
https://www.sciencedirect.com/science/article/pii/S2090447923002113
5- Optimal Design of Fractional-Order PID Controllers for a Nonlinear AWS Wave Energy Converter Using Hybrid Jellyfish Search and Particle Swarm Optimization - Fractal and Fractional - Impact Factor of 5.4
https://www.mdpi.com/2504-3110/8/1/6
6- Dynamic performance enhancement of nonlinear AWS wave energy systems based on optimal super-twisting control strategy - Ain Shams Engineering Journal - Impact Factor of 6.0.
https://doi.org/10.1016/j.asej.2024.102732 See all Khadija Academy courses
Courses you can instantly connect with... Do an online course on Renewable Energy starting now.
- Energy Management & Renewable Energy Academy for Health & FitnessUSD 218Duration: Upto 146 Hours
- Car Detailing Fundamentals International Open AcademyUSD 20
USD 66Duration: 30 To 120 Hours
