Cisco ONS 15454 Carrier Packet Transport

Course details

Overview:

This lab-intensive course is designed to provide students with the knowledge and skills required to deploy a Cisco Carrier Packet Transport (CPT) network. Students will learn about the CPT 600, CPT 200, and CPT 50 Satellite as well as M6 and M2 shelf hardware installation, power connections, and network connection.

The four kinds of Ethernet virtual circuits (EVCs: Ethernet private line, Ethernet virtual private line, Ethernet private LAN, and Ethernet virtual private LAN) are included in this course along withhow to install connections to an external router network and how to configure EVCs to it. You will learn how to set up the network for Multiprotocol Label Switching (MPLS) Transport Protocol (TP) and install MPLS-TP tunnels, Ethernet pseudowires and virtual private LAN services (VPLS), which are multipoint pseudowire. New to this version of the course are how constant bit-rate services, such as T1 and T3, are carried via EVC and pseudowire and how SyncE is configured in the CPT network. The last section covers integrated dense wavelength-pision multiplexing (DWDM), where DWDM is configured in the same chassis with CPT.

Objectives:

• After you complete this course you will be able to:
• Connect and configure a Cisco ONS 15454 M6 chassis
• Install the fanout group connection to the CPT 50 Satellite
• Install provisionable patch cords between CPT600/200 nodes
• Configure generic communication channel (GCC) between nodes
• Create EVCs
• Install node settings for MPLS-TP
• Create MPLS-TP tunnels and Ethernet pseudowires
• Install and test quality of service in the CPT network
• Create VPLS circuits
• Install interfaces to external router network
• Install SyncE in the CPT network
• Configure T1 circuits using EVC and pseudowire
• Install integrated DWDM and create satellite links over DWDM network
• Examine license information in the CPT-50 Satellite
• Troubleshoot the CPT network

Content:

• Module 1: CPT Hardware Fundamentals
• Module 2: CPT Software Fundamentals
• Module 3: Network Configuration Spans,PPCs and GCCs
• Module 4: Configuration for EVCs
• Module 5: Configuration for MPLS-TP
• Module 6: Installing MPLS-TP Tunnels and Pseudowires
• Module 7: Quality of Service for CPT
• Module 8: CPT Virtual Private LAN Service
• Module 9: CPT Router Interface
• Module 10: SyncE and Constant Bit-Rate Circuits
• Module 11: Embedded Dense Wavelength pision Multiplexing
• Module 12: Verifying Satellite License Information
• Module 13: Operations Administration and Maintenance
• Module 14: CPT Troubleshooting
• Labs