• Basics of workover techniques
• Completion fluids
• Different types of tubing , nipples and completion accessories
• Well head types
• Different types of down hole tools ( hyd. Packers, mech. Set packers, bridge plugs ……. Etc )
• Slick line operation
• Coild tubing operation
• Perforation types : on E/L  &
• Drill stem testing (DST)
• Acidizing
• Hydraulic fracturing
• Gravel packing
• Isolation water formation by Cement squeezing & straddle packer
• Gas lifting design
• Sucker rod completion
• Esp completion
• Progressive cavity pump
• Water injection completion string
• Gas completion string

Cost: 5500 USD

Duration: 15 Days

• Best practices of tripping.
• Definitions of different weight of drill string
• Different types of pressures in wellbore
• Different types of jars, mechanism of jarring & jar calculations
• Differential stuck & How to get free.
• Well bore geometry stuck
• Mechanical stuck
• Procedures to prevent stuck
• First actions for each stuck
• Hole cleaning problems
• Lost of circulation and how to cure losses
• Bit balling
• Washout
• Barite sag
• String vibrations ( vertical , Horizontal, Torsional)
• Different types of fishing tools and how to use them for different situations

Cost: 1200 USD

Duration: 3 Days

• Definitions of different weight of drill string
• Different types of pressures in wellbore
• Different types of jars, mechanism of jarring & jar calculations
• Differential stuck
• Well bore geometry stuck
• Mechanical stuck
• Procedures to prevent stuck
• First actions for each stuck
• Hole cleaning problems
• Different types of fishing tools

Cost: 1950 USD

Duration: 5 Days

Cost: 1950 USD

Duration: 5 Days

Cost: 1200 USD

Duration: 3 Days

• This course will introduce a solid and in-depth understanding of the different WL and MWD-LWD logging tools and technology with, special emphasis on geosteering operations and related borehole imaging applications.
• Participants will understand geosteering process using basic and advanced real-time drilling & logging technologies.
• During this course the participant will got familiar of the different geosteering procedures: well planning, prejob modelling, real time decisions and post job reporting.
• In this course our audience will navigate through different aspects of borehole image evaluation , formation dip identification, real-time utilization, cutting up, cutting down, reservoir entry-exit identification, fractures, insitu-stresses and fault analysis.

• To get a solid background about different logging operations and utilizations.
• To get familiar of different WL and LWD imaging tools
• To understand what is geosteering and why we do directional drilling.
• To be familiar of Prejob, Real-time and Post job procedures.
• Understand Geosteering operations and real-time communications.
• To get familiar of borehole evaluation while drilling.
• Geological changes while drilling (TVD, TVT, dip, structures, fractures and facies).
• To be familiar of azimuthal and non-azimuthal logs applications.
• To know the main logging packages for essential geosteering operations.
• To understand insitu-stresses (washout, breakout and induced fractures).
• To get familiar of the main petrophysical aspects for reservoir evaluation while drilling.

Cost: 6300 USD

Duration: 10 Days

• Understand various economic terms used in the oil & gas industry
• Understand how to develop economic models of various petroleum fiscal regimes
• Understand different depreciation methods.
• Carry out cash flow analysis and determine economic indicators
• Carry out different economic analyses for petroleum related projects
• Evaluate and quantify risks and uncertainties
• Make the right investment decision in the presence of risk
• Evaluate farming-out alternatives
• Carry out sensitivity analysis to determine the sensitivity of a number of key economic indicators when varying assumed parameters.
• Carry out a comprehensive economic evaluation study for any petroleum related project including risk analysis and sensitivity study using spreadsheet models.

• Experience gained will allow participants to apply tools for analyzing risk and uncertainties.
• Participants will be able to prepare cash flow analysis including the determination of economic indicators for different fiscal regimes
• Experience gained will include quantifying and qualifying risk and uncertainty through decision analysis and sensitivity analysis.
• Participants will be able to determine recoverable reserves using probabilistic methods.
• Participants will understand the role of petroleum economics in evaluating reservoir development project.

• Familiarization with Economic terms.
• Feasibility Studies
• Setting up Cash Flow Calculation
• Petroleum Fiscal Regimes
• Production Sharing Contracts (PSC)
• Depreciation
• Depreciation Methods
• Loss Carry Forwards
• Inflation
• Nominal & Real Cash Flow
• Sunk Costs
• Project Financing

• Economic Indicators Definitions
• Present Value Concept
• Discount Factor
• Net Present Value

• Internal Rate of Return
• Effect of Project Delay
• Payback Period
• Profit/Investment Ratio

• Incremental Projects
• Comparing Economic Indicators

• Risk & Uncertainty
• Expected Monetary Value Concept
• Decision Tree Analysis
• Farm-out Decision
• Probability Analysis
• Sensitivity Analysis
• Spider and Tornado Diagrams
• Probability Distribution
• Monte Carlo Simulation

• Introduction to Spreadsheet Calculation

• Simple Cash Flow Using Excel
• Setting up an Integrated Economic Model of a Typical Oil Field Development Project including Sensitivity Analysis

Cost: 2250 USD

Duration: 5 Days

Cost: 950 USD

Duration: 2 Days

• Intervention means classification.
• Well intervention main reasons:
• Measurement.
• Maintenance.
• Well remedial and workover.
• Main intervention means: wireline, coiled tubing, snubbing, workover rig.

• Review of completion installation and equipment technology:
• Standard completion.
• Intelligent completion.
• Multi-zone gravel pack completion.
• Deepwater completion fitted with sand control equipment.
• Review of wellhead set up.
• Review of BOP stack set up versus company rules.

• Safety issue during well servicing operations.
• Intervention equipment set up.
• Study of different well servicing cases:
• Standard completion.
• Tubing less completion.
• Intelligent completion.
• Multi zone gravel pack completion.
• Deep water completion fitted with sand control equipment.
• Light intervention case study.

• Safety issue during workover operations.
• Main operations:
• Well neutralization and means.
• Xmas-tree removal.
• Workover rig and BOP stack installation.
• Workover operation.
• Fishing operation.
• Operation risk evaluation versus well operation cost and budget.
• Depleted reservoirs:
• Losses and potential reservoir damage.
• Well kick-off after well intervention.
• Study of different well workover cases:
• Standard completion.
• Tubing less completion.
• Smart completion.
• Multi zone gravel pack completion.
• Deepwater completion fitted with sand control equipment.
• Workover case study.

Cost: 2250 USD

Duration: 5 Days

• Historical Background
• The Nature of Oil and Gas
• Basic geology
• The Earth's Crust Where We Find It
• Egyptian producers and leases geology
• Natural Gas Resources
• Gas Properties.
• Natural gas Composition.
• National grid gas specs.
• Natural gas Impurities

• Flow Assurance
• Gathering System and pipeline Networks
• Flow regime
• Hydrate prediction
• CO2 and H2S corrosion
• Natural gas process fundamentals.
• Phase Separation
• Gas separation principles and processes
• Two and three phase separators
• Design and operations criteria  
• Separator internals
• Separation process troubleshooting.

• Sweetening techniques
• Absorption
• Adsorption
• Process classification
• Design and operation parameters and criteria
• Selection criteria for sweetening processes
• Typical operation problems and troubleshooting.

• Gas Dehydration
• Process classification
• Theory and principles
• Glycols vs. solid desiccants
• Key operating parameters
• Typical operation problems and troubleshooting

• Condensate properties
• API

• Gas cooling and refrigeration
• Mechanical refrigeration
• Propane chiller
• LPG & LNG industry
• Equipment used inside gas process plants

• Pumps
• Heat exchangers
• Compressors
• Storage Tanks
• Open Discussion for problem solving.

• Gas processing engineers, surface facilities design engineers, surface facilities operations engineers, and gas plant managers and supervisors. Petroleum engineers, geophysicists, etc.
• Chemical Engineering.
• Petrochemical engineering.
• Petro physic section of faculty of science.
• Mechanical engineering students.
• Petroleum and Mining engineering students.
• Geology section of faculty of science.
• All technical and non-technical students hoping to join oil and gas companies.

Cost: 2250 USD

Duration: 5 Days

1. Introduction
2. Basic Terminology
3. Statutory Rules/ Regulations (API,NFPA,ASME)
4. Tanks Types And Classifications
5. Design Considerations
6. Tank Construction and Components
7. Tank Appurtenances
8. Inspection Techniques
9. Safe Operating Practices
10. Fire Protection of Tanks, types, causes and fire fighting
11. Safe Tank Entry

Cost: 1950 USD

Duration: 5 Days

1. Heat transfer principles
2. Shell and tube exchangers
3. Compact heat exchangers: plate-frame, printed circuit, welded plate
4. Brazed aluminum exchangers
5. Air coolers
6. Categories of fouling and control
7. Troubleshooting
8. Process Fired equipment (furnace type and fire-tube)
9. Draft Systems
10. Combustion Calculation
11. Air Preheat Systems
12. Boilers Types
13. Boiler blow down and calculation
14. Boiler Feed Water Treatment
15. Assessment Boiler Performance
16.  

Cost: 2250 USD

Duration: 5 Days

1. GLYCOL TYPES AND PHYSICAL PROPERTIES
2. BASICS OF GLYCOL DEHYDRATION UNIT
3. PROCESS DESIGN FACTORS
4. PRINCIPLES OF ABSORBER AND REGENERATION
5. GLYCOL DEHYDRATION COMPONENTS; CONTACTOR, TRAYS, PLATES, REBOILER, HEAT EXCHANGERS, FLASH DRUM, FILTERS, GLYCOL PUMP, ETC.,
6. OPERATING PROBLEMS
7. TROUBLESHOOTING AND PROCEDURES FOR RECOMMENDING ACTIONS
8. HYDRATE INHIBITION
9. METHODS OF PREVENTING HYDRATES FORMATION
10. CALCULATING METHANOL AND GLYCOL INJECTION RATES

Cost: 2250 USD

Duration: 5 Days

1. Glycol dehydration, types and physical properties
2. Basics of Glycol dehydration unit
3. Process design factors
4. Principles of absorber and regeneration
5. Glycol dehydration components; contactor, trays, plates, reboiler, heat exchangers, flash drum, filters, glycol pump, etc.,
6. Operating problems
7. Adsorption definitions and principles
8. main applications of solid adsorption
9. Solid desiccant characteristics, types
10. Basic system , Rregeneration cycles
11. Adsorber sizing equations , desiccant capacity, water loading, breakthrough
12. Hydrocarbon recovery, gas and liquid sweetening
13. Troubleshooting solid desiccant dehydration
14. Calcium chloride dehydration systems
15. Hydrate inhibition
16. Methods of preventing hydrates formation
17. Calculating methanol and Glycol injection rates

Cost: 2250 USD

Duration: 5 Days

1. Basic information
2. Uses of natural gas
3. Basic terminology
4. Basic hydrocarbon nomenclature
5. Physical properties of hydrocarbon systems
6. Overview of phase behavior
7. Water-hydrocarbon phase behavior
8. Gas hydrates
9. Basic thermodynamics
10. Separations systems
11. Dehydration of natural gas
12. Liquid hydrocarbons recovery
13. Mechanical refrigeration
14. Compression refrigeration
15. Expansion refrigeration
16. Acid gas removal
17. Heat transfer Systems
18. Heat exchangers, fired heaters
19. Key learning points

Cost: 2250 USD

Duration: 5 Days

1. Introduction
2. Applicable Codes
3. Types of Tanks
4. Storage Tank Constructions
5. Design Considerations
6. Tank Appurtenances
7. Emission Concepts
8. Basic Tank Corrosion Mechanisms
9. Safe Operating Practices
10. Inspection Techniques and Maintenance procedures For Cleaning And Repair Storage Tanks

Cost: 2250 USD

Duration: 5 Days

1. Basic Physical properties of Hydrocarbon systems
2. Hydrocarbon Phase behavior
3. Water-hydrocarbon phase behavior
4. Separations systems
5. Dehydration of natural gas
6. Liquid hydrocarbons recovery
7. Mechanical refrigeration
8. Compression refrigeration
9. Expansion refrigeration
10. Sweetening Operations

Cost: 2250 USD

Duration: 5 Days

1. Introduction to Mud Logging
2. Conventional Mud Logging Practices
3. Penetration Rate and Lithology
4. Gas Measurement and Analysis
5. Supplemental Logging Techniques and Applications
6. Advanced Mud Logging and Advisory Practices
7. Selection of Services and Equipment
8. Mud Logging: References and Additional Information

Cost: 2250 USD

Duration: 5 Days

• Petroleum composition and classification
• Pressure and Temperature States

• Measurement and Detection
• Gas Sources
• Factors influencing Quality and Composition: Formations, drilling, fluid movements, surface considerations

• Definitions and Basic Logs
• Hydrocarbon ration Analysis
• Gas Ratios and Geosteering
• Fluorescence

• Determination of fluid type and density changes
• Determination of gas, oil and water contacts
• Correlation and non-correlation in wireline logs
• Horizontal wells and geosteering
• Miscible flood identification
• Fracture identification
• DST results versus ratio analysis
• Profiling reservoir characteristics with gas ratio and other mud logging data
• Effects of low API oils on gas ratios
• Effects of low viscosity/low gel strength mud on gas analysis

Cost: 2250 USD

Duration: 5 Days

1. Make well to well correlation
2. Understand well drilling
3. Understand mud logging equipment
4. Calculate the lag time and advanced volumes calculations
5. Describe the formation cuttings
6. Integrate the cuttings evaluation with the drilling parameters
7. Interpret all the acquired geological and engineering data at the rig site
8. Evaluate the hydrocarbon potential of the formation
9. Deal with drilling mud rheology and hydraulics
10. Handle, process and describe cores
11. Evaluate different types of pressure
12. Handle formation pressure to minimize borehole risks

• a) Introduction in Oil Field Industries.
• b) Rig (Types, Components, and Persons).
• c) Rig Operations (Drilling, Tripping, Casing, Cementing, Testing, Completion, and Problems).
• d) Mud types, purposes, and mud cycle.

• a) Definition, Functions, History.
• b) Logging Unit Equipment and Sensors Types.
• c) Logging Unit Crew, duties, and responsibilities.
• d) Mud Log Forms and contents.

• a) Volume, Lag, and Stroke Calculations.
• b) Depth Calculations.

• a) Type of samples.
• b) Sample Collections and preparations.
• c) Sample descriptions and examination tests.
• d) Hydrocarbon shows indications and description.

Cost: 1950 USD

Duration: 5 Days

• Surface and subsurface facies analysis - concepts and techniques
• Scale - regional to single well
• Depositional architecture
• Basins and units

• Introduction to clastic sediments
• Facies analysis
• Sedimentary structures
• Data acquisition and log responses
• Aeolian environments
• Alluvial fan and floodplain environments
• Coastal deltaic environments
• Linear coastal environments
• Shelf processes
• Deep marine environments
• Glacial and glaciogenic environments
• Source rock facies
• Regional and field scale mapping

• Introduction to carbonate sedimentology
• Environmental analysis
• Classification of carbonate platforms
• Depositional environments
• Aeolian and lacustrine facies
• Sabkha and tidal flat
• Barrier shoals and lagoons
• Reef models
• Pelagic and redeposited carbonates
• Diagenesis and fracturing
• Karstic plays
• Source rock facies
• Regional and field scale mapping

• Basic concepts
• Controls on sequence development
• Parasequences
• Parasequence sets
• Sequences and systems tracts
• Clastic sequence stratigraphy
• Carbonate sequence stratigraphy
• Mixed systems: carbonate and siliciclastic

• SP log
• Resistivity logs
• Gamma ray log
• Sonic log
• Porosity logs
• Caliper logs
• Dipmeter logs
• Image logs
• Typical log curve shapes
• Identifying marker beds and bounding discontinuities from logs
• Correlating logs to conduct regional facies analyses
• Correlation of stratigraphic units from log data
• Generating cross sections and facies maps from log data
• Subsurface mapping and structural analysis from logs

• Identifying facies in core
• Identifying key surfaces and marker beds
• Correlating with log data

• Seismic stratigraphy
• Seismic sequence stratigraphy
• Identification of reflector terminations
• Seismic facies analysis
• 3-D seismic geometry
• Seismic facies mapping

• Geologists, Petrophysicists and Geophysicists.
• Engineers, Managers and Supervisors.

Cost: 2250 USD

Duration: 5 Days

1. Introduction to petroleum systems
2. The role of structures in petroleum systems        
3. Fundamental aspects of structural geology and geo-mechanics and its application to general geological phenomena as encountered in the oil and gas business
4. Extensional tectonics: rifts, delta's, domes and associated sedimentation ;
5. Theory, examples, analogue models, structural geometries and fault properties that are characteristic for extensional tectonic regimes will be treated during the morning session of day-2. Structural reservoir types and fault sealing mechanisms will be part of the material.
6. Strike-slip tectonics
7. Theory, case history, analogue models, seismic interpretation. Structural geometries and fault properties that are characteristic for strike-slip tectonic regimes will be treated during the afternoon of day-2. Structural reservoir types, in-situ stress analysis and fault sealing mechanisms (also in sand-sand juxtapositions) will be part of the material. The 3D nature of this tectonic setting including pitfalls and traps in structural interpretation will receive special attention           
8. Compressional tectonics: fold-and-thrust belts.
9. Compressional tectonics: fault reactivation – multi-phase tectonics.
10. Theory, case histories, analogue models, seismic interpretation exercise. Structural geometries and fault properties that are characteristic for compressional tectonic regimes will be treated during the morning of day-3. Structural reservoir types and fault sealing mechanisms will be part of the material. During the afternoon session the mechanics of fault reactivation (inversion tectonics) will be discussed.        
11. Pore pressure prediction and overpressure generation mechanisms.
12. Diapirs and associated structures.
13. Fault sealing and top seal integrity.       
14. Aspects of salt-tectonics will be discussed during the morning of day-4. Examples from the North Sea and the Gulf of Mexico, including an interpretation exercise. The afternoon session will be used to discuss fault sealing mechanisms and approaches to evaluate top seal integrity in exploration and in production scenarios.
15. Fracture systems: fracture mechanics, reservoir examples and outcrop ;
16. Analysis of fault and fracture systems, including fractal properties of fault and fractures and prediction of sub-seismic faults.
17. Theory, case histories, analogue models. The morning session will be used to discuss fracture mechanics, fracture types, natural fracture systems and their influence on reservoir characteristics and production strategies.

• Geologists, Petrophysicists and Geophysicists.
• Engineers, Managers and Supervisors.

Cost: 2250 USD

Duration: 5 Days

• Fluvial Environment:
• Alluvial fan environment:

1. Alluvial fan definition.
2.  Geometry of alluvial fan.
3.  Setting of alluvial fan.
4.  Classification of alluvial fan.
5.  Facies characteristics.
6.  Alluvial fan from logs and seismic.
7.  Alluvial fan from cores.
8.  Associated facies.
9.  Economic reservoir potentiality of alluvial.
10.  Fan deposits.
11.  Example of alluvial fan reservoir.

• Stream channel cycles:

1. Youth stage.
2. Mature stage.
3. Old stage.

• Braided channel.

1. Braided channel deposits.
2. Geometry of braided channel deposits.

• Meander channel characteristics.

1. Definition.
2. Lithology.
3. Geometry.
4. Sedimentary structures.
5.  Controls on rivers types.
6.  Associated facies.
7.  Associated environments.
8.  Log response.

• Deltaic Environment:

1. Controlling Factors.
2. Delta Classification.
3. Fluvial Dominated.
4. Wave Dominated.
5. Tide Dominated.
6. Delta Cycles.
7. Fan Delta.
8. Case Study.

• Sedimentologists, Geologists, Petrophysicists and Geophysicists.
• Engineers, Managers and Supervisors.

Cost: 2250 USD

Duration: 5 Days

1. Introduction to Sedimentary Basins
2. Basin Forming Mechanisms
3. Basin Classification and Structural Analysis
4. Basin Fill
5. Geochemical Analysis
6. Temperatures and Pressures in Sedimentary Basins
7. Petroleum System Modeling
8. The Petroleum Systems Modeling Approach
9. Hydrocarbon Generation
10. Hydrocarbon Migration
11. Uncertainty Management and Quantification

Cost: 1950 USD

Duration: 5 Days

1. Apply quantitative contouring techniques
2. Recognize common contouring pitfalls
3. Find thickness in deviated wells
4. Use thickness maps to interpret structure
5. Construct predictive cross sections
6. Apply the best techniques for projecting data
7. Map faults and integrate them into horizon maps
8. Build a complete 3-D interpretation
9. Recognize valid and invalid fault surfaces
10. Interpret folds and faults from dipmeters
11. Construct juxtaposition (Allan) diagrams for fault trap and seal analysis
12. Map structures with multiple overlapping faults

1. Contouring techniques
2. Using dip in mapping
3. Different measures of thickness
4. Thickness in deviated wells
5. Isopach and isocore maps
6. Dip-domain cross sections
7. Data projection
8. Trend and plunge of folds on tangent diagrams
9. Composite-surface maps
10. Fault shapes and displacement distributions
11. Heave and throw from stratigraphic separation
12. Stratigraphic seperation from structure contour map
13. Constructing fault-plane maps
14. Faults on isopach maps
15. Combining fault and horizon maps
16. Contouring across faults
17. Structural quality-control techniques
18. Multiple-surface map compatibility
19. Map validation using implied fault contours
20. Finding faults and fault orientations with SCAT analysis of dipmeters
21. Juxtaposition diagrams for trap and seal analysis
22. Fault-cutoff lines in computer mapping
23. Soft linked and hard linked faults
24. Relay and branching fault patterns
25. Mapping sequential cross-cutting fault

• Development geologists and those exploring mature areas.
• Early-career geologists and technologists who make structure maps.
• Those who need to judge the validity of maps and cross sections.

Cost: 2250 USD

Duration: 5 Days

1. Sediment textures and their influence on reservoir quality (porosity and permeability)
2. Brief introduction to diagenesis
3. Sedimentary processes - transport and deposition
4. Facies analysis - methods for the interpretation of sedimentary environments from core and wireline logs
5. Introduction to the aeolian, fluvial, shallow marine and deep-water depositional environments, with examples of hydrocarbon reservoirs from these environments
6. Use of outcrop analogues
7. Data collection strategies in the field and subsurface
8. 3-D modelling and geological realism
9. Reservoir engineering aspects of sedimentology - impact of heterogeneity on fluid flow
10. Field trip to examine modern and ancient sedimentology

Cost: 1950 USD

Duration: 5 Days

1. Recognize basic characteristics of carbonates important to reservoirdevelopment
2. Understand how sequence stratigraphy can be applied to carbonatesand mixed carbonate-siliciclastic systems
3. Understand the complexities of carbonate pore systems
4. Recognize the nature of carbonate porosity modification duringdiagenesis and the role of sea-level and climate in porosity modificationand gross reservoir heterogeneity
5. Develop viable exploration and exploitation strategies in carbonateterrains by working with subsurface datasets

1. Basic nature of carbonates
2. Carbonate facies models
3. Basic concepts of sequence stratigraphy
4. Relationship of stratigraphic patterns to changes in subsidence rates 
5. Sequence stratigraphic models including the ramp, the rimmed shelf,the escarpment margin, the isolated platform, and the mixed carbonate-siliciclastic shelf
6. Characteristics of carbonate pore systems
7. Diagenesis, porosity evolution, and porosity distribution at the time ofburial
8. The fate of early-formed porosity during burial
9. The potential value of dolomitization, including by hydrothermal processes
10. The problem of H2S in carbonate reservoirs
11. Natural fractures in carbonates
12. Case histories and exercises from the Americas, Europe, and Asia
13. Exploration and exploitation strategies in carbonate and mixed terrains

Cost: 1950 USD

Duration: 5 Days

1. Introduction to fault seal and trap analysis.
2. Trap and fault geometry concepts and estimating closures and initial seal risk.
3. Methods and concepts on correctly characterizing faults and throw distributions. Theory and methods for evaluating correct fault linkages.
4. Fault zone architecture, mechanical stratigraphy and the influence on fault flow resistance.
5. Fault population statistics.
6. Review of fault rock types based on the unreformed host rock lithology.
7. Basic principles of flow through porous media including permeability and threshold pressure.
8. Introduction to fault mapping.
9. Discussion on estimating sealing capacity from the threshold pressure for a range of fault rock types.
10. Discussion of relative permeability impact on flow resistance across faults.
11. Review of methods for estimating the clay distribution across a fault surface including clay smear factor, shale gouge ratio and effective shale gouge ratio.
12. Discussion of techniques for calibrating relationships between fault rocks.
13. Triangle diagrams for estimating fault seal.
14. Introduction to Geomechanics for fault development and controls on slip.
15. Introduction to reservoir flow simulation and modeling fault flow resistance in development.
16. Risking and uncertainty.
17. Validation of methods and summary of course concepts

Cost: 1950 USD

Duration: 5 Days

1. Fundamental concepts and basic applications
2. Thermal/maturation modelling
3. Relationship of geothermal gradients, thermal conductivities and heat flux; measured and calculated thermal maturity values; interpretation of thermal history; misapplications.
4. Interpretation of pyrolysis data/source rock productivity
5. Effects of kerogen type, maturity kerogen composition; potential and hydrocarbon productivity.
6. Hydrocarbon composition/oils/biomarkers
7. Control of hydrocarbons on physical properties of petroleum; source type, maturity, mixing and alteration processes reservoir geochemistry.
8. Source rock/basin modelling
9. Source rock facies, palaeoenvironments and geochemical signatures; the geochemical approach to basin modelling; case histories.
10. Geochemical evaluation
11. Range of geochemical analyses; organisation of analytical programmes; combinations of analyses to solve specific problems; case histories.
12. Each session involves worked examples.

Cost: 1950 USD

Duration: 5 Days

1. Identify stratigraphic sequences
2. Interpret seismic reflection geometries
3. Relate sequence stratigraphy to basin architecture, relative sea levels and history
4. Build predictive stratigraphic model

1. Sea level change and Accommodation Potentiality of the Basin.
2. Paleobathymetry as a Tool to Measure the Relative Sea level Change. (Quantitative Method - Qualitative Method)
3. The Ecological Factors Affecting the Bathymetry Indicators.
4. Exercises

1. Objectives.
2. Stratigraphic Units and Stratigraphic Type Section.
3. Physical and Genetic Correlation.
4. Lithostratigraphic Correlations.
5. Disorder of Stratigraphic Units and Pitfalls in Stratigraphic Correlation.
6. Exercises

1. Introduction.
2. Definition, Global Sea Level Curve, Geological Significances.
3. Basin fills Controlling Factors and Stratal Patterns.
4. Elements of Sequence Stratigraphy and Reservoir Potentiality within:
   • Lowstand system tract (LST).
   • Transgressive System Tract (TST).
   • Flooding Surface (FS).
   • Maximum Flooding Surface (MFS)
   • High Stand System Tract (HST).
5. How to systematically construct Sequence Stratigraphy model.
6. Exercises :
   • Stratigraphic versus Lithostratigraphic Correlations & Reservoir Prediction.
   • Interpretation of Seismic Sequence Stratigraphy.
   •  Identifying Sequence Boundaries.

Cost: 1950 USD

Duration: 5 Days

1. How to Calculate geological risk and uncertainty in exploration prospects
2. Determine prospect resource volume estimates
3. Assess resource distribution in a play
4. Understand the differences between stochastic and probabilistic estimates and have the knowledge to know when to one or the other.
5. Predict the number and size distribution of potential future fields in a play
6. Describe and calibrate risks associated with discovering a successful play

1. Geological controls of oil and gas occurrence: their impact on exploration risk and success
2. Review of common assessment methods: selection of the most practical approach
3. Application of volumetric prospect assessments: techniques, comparative data, and graphs to estimate input factors, such as trap volume, porosity, net/gross saturation, hydrocarbon fill fraction, formation volume factors, and recovery efficiencies
4. Probability methods: the expression of uncertainty for input factors and results including Monte Carlo techniques
5. Risk analysis: Principles and practice
6. Hydrocarbon charge assessment: procedures for estimating possible amounts of oil and gas generated, migrated, and trapped in prospects
7. Prospect assessment workshop: projects supplied either by the instructor or by participants, worked by teams and reported to the entire group
8. Play assessment techniques: estimating the possible numbers, sizes, and associated risks for potential fields, with useful data on field densities, field-size distributions, oil versus gas relationships, and dependent versus independent risks
9. Play recognition and mapping: play classification and subdivision, and play maps that high-grade the most favorable areas with minimal geologic risks
10. Play assessment workshop: projects supplied either by the instructor or by participants, worked by teams and reported to the entire group
11. Aggregation of assessment results: summing, derisking, and preparation for economic analysis
12. Limitations, pitfalls, uses, and discovery concepts: the philosophy of judging and using assessment results and the importance of basic geologic concepts

Cost: 1950 USD

Duration: 5 Days

1. Plan and prepare for a drilling location and for geological services 
2. Identify drilling operations and geological drilling hazards 
3. Understand and apply logging services
4. Understand well testing services 
5. Evaluate drilling reports
6. Describe drilling cuttings and cores
7. Evaluate the impact on the field development plan 
8. Prepare and compile operations reports

• Types of drilling(hole size and hole geometry|)
• Rig types(onshore rigs, offshore rigs)
• Bit types
• Casing operations(types of casing, cement job)
• Mud properties (types of drilling mud)

• Mud logging
• Wireline logging operation
• LWD and MWD operations
• Formation evaluation logs

• Cuttings sampling and preparation
• Cuttings description (clastics, carbonates, evaporates)
• Reporting procedures
• Lithology logs
• Oil and gas shows evaluation
• Uv light and solvent tests
• Gas detection equipment
• Oil shows interpretation

• Cutting catchers
• Microscope
• Dry oven
• Calcimetry
• Oil shows interpretation
• Uv light (oil shows)

• Conventional coring
• Sidewall cores

Cost: 1950 USD

Duration: 5 Days

1. Understanding the depositional parameters defining the reservoir architecture,
2. The use of tools to predict subsurface reservoir architecture and
3. The impact of the heterogeneities on reservoir performance at different scales

1. Framework for reservoir modelling
2. Depositional processes and deposits.
3. Geological features influencing hydrocarbon recovery.
4. Clastic Reservoir Architecture, determination of architecture from seismic, logs, tests and core data
5. Geologic controls on porosity and permeability.
6. Trap type and compartmentalization of the reservoir
7. Faults, fractures and fluid flow. Sealing capacity of faults; shale baffles.
8. Core acquisition, analysis and interpretation.
9. From geological data to engineering models.
10. Principles of up scaling and application of Geostatistics.
11. Capturing subsurface uncertainties in volume estimates.

Cost: 1950 USD

Duration: 5 Days

1. Project Setup.
2. Dealing with license problems (Different ports or different program using the same port).
3. Data Loading and Quality Control.
4. Auditing and QC Mechanisms.  
5. Data Output.
6. Disk Space Management.
7. Database Administration and Backup.
8. Integration of all subsurface data.
9. Geological and geophysical data preparation.
10. Seismic interpretation for horizons and faults interpretation (Some attributes will be introduced to help detect some seismic features ex: faults).
11. Well correlation.
12. Automatic facies interpretation using two different methods.
13. Mapping and contouring (This step will include map enhancement and editing).
14. Velocity Modeling methods and how to apply using Petrel.
15. Fault modeling and QC (This step will include fault editing and connection plus the limitation of the software).
16. Fault gridding approach.
17. Finalize one 3D structure model.
18. Depth conversion 2D and 3D.
19. Zonation and layering and its effect on the model resolution and facies analysis.
20. LGR.
21. Geo-statistics analysis (This step including variograms analysis and trends determination).
22. Facies modeling (Stochastic and deterministic and the difference between them).
23. Petrophysical modeling (Porosity and permeability and generate different realizations).
24. Volumetric calculation.
25. Uncertainty analysis.
26. P10, P50 and P90 generation.

Cost: 1950 USD

Duration: 5 Days

1. Comparative structural geology
2. Structural families and styles
3. Mechanical principles governing fold and fault geometry
4. Predicting structure from stratigraphy
5. Folding vs. faulting
6. Palinspastic restoration of cross sections
7. Structural validation criteria
8. Sequential restoration and growth history
9. Regional arches and domes
10. Compaction and substratal solution
11. Wrench faults: simple, convergent, and divergent
12. Conjugate and domino-style strike-slip regimes
13. Thin-skinned fold-thrust belts
14. Fault-related folds
15. Duplexes
16. Basement-involved contraction
17. Vertical and rotational block uplifts
18. Inversion: dip-slip to strike-slip
19. Thin-skinned extension
20. Basement-involved extension
21. Half-graben and full graben rift systems
22. Domino-style extension
23. Diapirs
24. Salt sheets
25. Roho and counter-regional pseudo extensional fault systems
26. Plate-tectonic habitats of structural assemblages
27. Tectonic synthesis and exploration project

Cost: 1950 USD

Duration: 5 Days

1. Apply mechanical-stratigraphic concepts to understand and predict trap geometry.
2. Use restoration and balance to validate an interpretation and interpret the structural evolution.
3. Recognize the structural style or styles of a region map and cross-sectional expression.
4. Distinguish characteristics of each structural style on reflection seismic sections.
5. Interpret the mechanics of deformation for each structural style.
6. Predict effects of deformation on reservoir porosity , permeability , and continuity.

1. Mechanical principles governing folding and faulting.
2. Mechanical stratigraphy.
3. Predicting structure from stratigraphy.
4. Deformation mechanisms.
5. Folding vs. faulting.
6. Palinspastic restoration of cross sections.
7. Structural validation criteria.
8. Sequential restoration and growth history.
9. Structural assemblages: families and styles.
10. Fault-related folds.
11. Regional arches and domes.
12. Compaction, dissolution and impact structures.
13. Wrench faults: simple, convergent, and divergent.
14. Thin-skinned fold-thrust belts.
15. Basement-involved contraction.
16. Inversion.
17. Thin-skinned extension.
18. Basement-involved extension.
19. Salt sheets.
20. Diapers.
21. Exploration problems for each style.
22. Plate-tectonic habitats of structural assemblages.
23. Effects of structures in reservoir: joints, stylolites, faults.
24. Deformation that enhances or reduces permeability.
25. Predicting the effect of fault zones on fluid flow.
26. Tectonic synthesis and exploration ;

Cost: 1950 USD

Duration: 5 Days

• To those unfamiliar with hydrocarbon exploration and production, there are many unfamiliar terms and techniques commonly used by geologists, geophysicists and engineers. This course will introduce and explain this terminology and provide a background into exploration methods, drilling processes and field development. A combination of lectures, practical exercises and a case study are used to ensure that participants gain a full understanding of the all aspects of hydrocarbon exploration, discovery and extraction.
• By the end of the course participants have a good but general understanding of the 'upstream' oil and gas industry: how hydrocarbons are found, developed, produced and treated prior to sales. Participants work in teams on an actual field case, and go through all steps that lead to a field development plan, including an economic assessment.

1. History of the oil industry, current issues.
2. Geological concepts, global distribution of hydrocarbons, nature and geometry of hydrocarbon reservoirs, geological requirements for hydrocarbon accumulation, origin of hydrocarbons, rock types and origins
3. Methods and tools used for hydrocarbon exploration, including drilling, geological mapping; satellite imagery and remote sensing; gravity-magnetic surveys; seismic reflection geophysics acquisition, processing and interpretation; seismic mapping; play fairway mapping; prospect evaluation and risking.
4. Field appraisal and static models of reservoirs.
5. Assessing amounts of hydrocarbon-in-place and uncertainties.
6. Dynamic models and subsurface development options, surface engineering and field operations
7. Project economics
8. Environmental issues

Cost: 1950 USD

Duration: 5 Days

1. Review and study of the RESERVOIR ROCK AND FLUID PROPERTIES  
2. Review and study of OIL DISPLACEMENT BY WATERFLOODING
3. Review and Analysis of the KEY FACTORS IN THE WATERFLOODING PROCESS
4. The Gelling System as a predominant method of blocking permeability and redistributing water drive
5. Field Applications of Polymer Gel Systems, 
6. Polymer gel selection 
7. Study of proper identification of the water-production mechanism, 
8. Study and analysis of appropriate selection of wells.
9. Selection of the water control agent, 
10. Methods of water control agent placement and treatment design   
11. A diagnostic and Solutions of water production problem based on qualitative analysis of reservoir characteristics, production data and well test results.
12. Moreover, the usual technique to optimize single well treatments.
13. What experience has taught us?
14. What are the latest advance and what is coming and needed.

Cost: 2250 USD

Duration: 5 Days

• This course concentrates on Reservoir and field operations aspects of water flooding injection for pressure maintenance and Secondary Recovery.
• Study in depth of Fractional Displacement theory and all methods available in the oil and gas industry to predict oil recovery.
• The course is a theoretical-practical course and is designed to as a workshop where the participant has to work hard solving a series of projects to apply immediately the concepts, mathematical principle as and theories presented and learned during the course.
• The participants will use a reservoir engineering software designed for water injection. The software will be provided to each participant without additional cost.

Cost: 2250 USD

Duration: 5 Days

• Water flooding is one of the most important methods of improving recovery from oil reservoirs.
• This section of the course concentrates on reservoir and field operations aspects of water injection for pressure maintenance and secondary recovery.
• Participants will study fractional displacement theory and all methods available in the oil & gas industry to predict oil recovery.
• The course is a theoretical practical course where participants have to work towards solving a series of projects, and to immediately apply the concepts, mathematical principles and theories presented and learned during the course.
• Laptop/computers will be used to solve problems related to water flooding.

1. To understand and practice the prediction and interpretation of oil & gas reservoirs under different known methods of water Injection.
2. To review primary recovery mechanisms through the fundamentals of rock and fluid interaction to the application of classical waterflood prediction techniques.
3. Technical knowledge of waterflood pattern options and the effect of selection and orientation on flood performance.
4. Computer understanding the use and of Material Balance Software (MBE)
5. Injection Wells Specifications, Control and Hall Plot as a Monitoring Tool of after Injection Wells
6. Discussion on “Practical Reservoir Management for Mature Waterflooding”.

Cost: 2250 USD

Duration: 5 Days

• Water alternating gas (WAG) injection are improved oil recovery methods that involve three-phase fluid flow. It was originally proposed as a method to improve the sweep efficiency of gas by using water to control the mobility ratio and to stabilize the front (Caudle and Dyes, 1958; Christensen et al., 1998).
• WAG injection can lead to improved oil recovery by combining better mobility control and contacting upswept zones, and by leading  to  improved microscopic displacement.
• WAG flooding has been successfully applied to more than 60 oilfields worldwide.
• This course will present WAG Miscible, WAG Immiscible, WAG alternating different types of Hydrocarbon Gases and Non-HC such as N2 and CO2 Gases.
• Also, the course will present and study the Factors Influencing Wag Process Design such as Fluid properties and rock-fluid, Availability and composition of injection gas, Heterogeneous Permeability, Injection Pattern, Capillary pressure, Relative permeability and Wettability.
• A WAG Process is presented and discussed in the course as well as Field cases and Laboratory research cases and results.

1.  Comparative of EOR methods and use of Waterflooding
2. Study of the EOR Mechanism in  Chemical and Miscible and WAG Methods
3. EOR Screening Criteria and technical constrains for Chemical and WAG methods.
4. Study of an actual case WAG Miscible and WAG immiscible processes
5. Comparison between WAG Alternating and Continue Injection Gas
6. Technically Review and Study of the  Factors Influencing WAG Process Design (Fluid properties and rock-fluid, Availability and composition of injection gas, Heterogeneous Permeability, Injection Pattern, Capillary pressure, Relative permeability, and Wettability)
7. Perform an Analysis of the Water-Alternating-Gas (WAG) Process
8. Technically review and practice of the Effect of capillary number and mobility ratio on residual oil recover
9.  A comparative study of FIELD CASE AND LABORATORY CASE OF WAG and SWAG.
10. Miscibility Concepts and Mathematical Background review
11. Discussion of “The Need for Miscibility Development ”
12. Effect of Brine Composition 
13.  Importance of CO2 as Injectant Gas 
14.  Problems Associated with the WAG Process
15. The impact of the following parameters on WAG processes: 
16.  WAG ratio 
17.  Injection pattern 
18. Injection / production pressure and rates 
19. WAG cycle time 
20. Time to Initiate WAG process
21. Presentation and discussion of technical information on Chemical Flooding: 
    - Objectives of Chemical Flooding
    - Chemical EOR Screening Criteria
    - Processes Evaluations
    - Chemical success evaluation with WAG using CO2 Immiscible Processes

Cost: 2250 USD

Duration: 5 Days

Cost: 1950 USD

Duration: 5 Days

• This training course will provide a comprehensive coverage of the simulation key topics, challenges, pitfalls and the approach to a quality result.
• The participants will be trained in the methods and use of simulation software for practical exercises throughout this course.

1. Numerical physics of reservoir simulation.
2. Data requirements for conducting a study.
3. Current practice in using coarse and finely gridded models to incorporate heterogeneity.
4. Simulation study approach which leads to a quality result.
5. Different types of models available, compositional, dual porosity, etc.

1. Formulation of equations
2. Coordinate geometries and model types
3. Reservoir simulator features
4. Well modelling overview
5. Building the model
6. Defining initial conditions
7. History matching
8. Prediction
9. Fine vs. coarse gridding, Upscaling, LGR, Heterogeneity modelling
10. Pseudo functions, Vertical Equilibrium
11. Compositional reservoir simulation
12. Simulation of fractured reservoirs - numerical model, matrix-fracture exchange, recovery processes
13. Simulation Walkthrough
14. Overview of the simulation process: Conducting a study

Cost: 1950 USD

Duration: 5 Days

• Utilize the tools and techniques of the reservoir engineer
• Apply the principles of reservoir engineering
• Develop reservoir, well performance and asset management options

1.  Distribution of Reservoir Properties: structure, fluid contacts, water saturation, and pressure
2. Rock Properties: porosity, permeability, capillary pressure, and relative permeability
3. Fluid Properties: phase behavior of reservoir fluids; properties of gas, oil, and water; PVT Sampling; and PVT laboratory reports
4. Volumetric Calculation of Initial Hydrocarbons in Place: oil in place, gas in place, addressing uncertainty using probabilistic methods, reserve booking practices, and reservoir recovery efficiencies
5. Material Balance Methods: oil reservoir material balance, Havlena Odeh method, gas
6. material balance, volumetric, compaction, water drive, and compartmentalized reservoirs
7. Fluid flow and well performance: radial and linear flow, transient, pseudosteady state, steady state flow regimes, productivity of vertical and horizontal wells
8. Aquifer influx
9. Immiscible Displacement: fluid displacement process, fractional flow, Buckley Leverett, Welge, water under running, and gas overriding
10. Coning and Cusping: description of process, critical rates, using horizontal wells
11. Reservoir Types and Drive Mechanisms: gas reservoirs - volumetric, water drive and compaction drive; oil reservoirs - solution gas drive, water drive, water flood, gas cap expansion, combination drive, naturally fractured and critical reservoir fluid reservoirs
12. Reservoir Simulation: why simulate, types of simulators and simulation models, setting up a simulation model, conducting a simulation study
13. Field Development Planning: characteristics, planning tools, deliverability issues, determining a well count and rate forecast

Cost: 1950 USD

Duration: 5 Days

1. Concepts review: Reserves, Developed Reserves, Production/Reserves Relationship, Reservoir, Reservoir Exploitation Target, Reservoir Development, Oil Mobility, Darcy’s ;
2. Stages of the life of a reservoir:

1. Spacing between wells:

1. Reservoirs energetic characterization:

Cost: 1950 USD

Duration: 5 Days

1. How to collect and analyze the data needed for reservoir engineering tasks
2. The fundamentals of fluid flow in porous media
3. How reservoirs are characterized by fluid type and drive mechanisms
4. The basis for reservoir fluid distribution
5. About oil and gas well performance and pressure buildup analysis
6. About oil displacement and optimizing reservoir performance
7. The basics of enhanced oil recovery
8. How oil and gas in place can be estimated and recovery predicted

Cost: 2250 USD

Duration: 5 Days

• Basic Reservoir Engineering is a course designed to help the participants develop a more complete understanding of the characteristics of oil and gas reservoirs, from fluid and rock characteristics through reservoir definition, delineation, classification, development, and production.
• Data collection, integration, and application directed toward maximizing recovery and Net Present Value are stressed.
• Basic reservoir engineering equations are introduced with emphasis directed to parameter significance and an understanding of the results.
• For nearly 30 years this has been one of our most popular and successful courses.
• The Basic Reservoir Engineering course includes class exercises designed to be solved by hand with a calculator.
• For those who prefer to use spreadsheets to do the calculations, participants are welcome to bring their own laptop computers.

1. How to collect and analyze the data needed for reservoir engineering tasks
2. The fundamentals of fluid flow in porous media
3. How reservoirs are characterized by fluid type and drive mechanisms
4. The basis for reservoir fluid distribution
5. About oil and gas well performance and pressure buildup analysis
6. About oil displacement and optimizing reservoir performance
7. The basics of enhanced oil recovery
8. How oil and gas in place can be estimated and recovery predicted

1. Reservoir fluid properties
2. Coring practices and reservoir rock properties
3. Fundamentals of fluid flow
4. Reservoir fluid distribution
5. Reservoir classification
6. Reservoir drive mechanisms
7. Oil and gas well performance, including inflow and outflow concepts
8. Pressure buildup analysis
9. Oil displacement concepts
10. Estimation of oil-in-place and gas-in-place
11. Recovery techniques

Cost: 1950 USD

Duration: 5 Days

• This course discusses the physical characterization of crude oil, gas liquids and gas. Discussions of the causes of problems in all types of wells to include oil, gas, shale oil, coal bed methane, gas storage, injection, EOR produced wells and all types of surface equipment are included.
• The type of problems encountered in oils from 8 ° API to 90°API caused by paraffin and asphaltenes will be discussed.
• Field strategies for the production of these oils from these wells and practical solutions to produce these oils are presented. Testing methods for characterizing the physical characteristics of these oils and selecting possible treatment methods are covered. Discussions of current treatment methods, Mechanical, Thermal, Chemical and Others, to reduce or eliminate problems are included.
• A section will be included on effects of paraffin and asphaltenes on emulsion, corrosion and scale problems.
• A section on selecting Cost Effective treatment methods will be included. Formation damage removal of paraffin and asphaltenes from new and mature wells will be included.
• Questions will be taken throughout the course and discussion of the participants own problems will be encouraged.
• Laboratory and Field case histories are a large part of this course.

Cost: 2250 USD

Duration: 5 Days

1. Reserves ;
2. Importance of reserves for the corporation.
3. Quantification of OOIP, OGIP and ;
4. Recovery factor estimation by various ;
5. Production mechanisms and their influence onultimate ;
6. Influence of sedimentology on ultimate recovery.
7. Ultimate recovery for naturally fractured ;
8. Decline curves:Exponential, Hyperbolic and ;
9. Material ;
10. Numerical Simulation ;
11. Estimation of reserves associated to a well.

Cost: 1750 USD

Duration: 4 Days

1. Use the exponential, hyperbolic and harmonic decline curve equations - including exercises to perform the calculations
2. See the relationships between reservoir recovery mechanisms and decline curve types
3. Identify and understand how the transient flow period can lead to an overestimation of reserves
4. Use multiple methods to avoid overestimating reserves
5. Recognize reservoir performance characteristics based on actual field examples
6. See the impact of reservoir heterogeneities such as faulting, permeability variance and layering
7. Account for changing operating conditions
8. Perform analysis on a multi-well basis without introducing common errors
9. Use alternative methods including diagnostic performance plots (, log WOR vs. Np, Stagg's, P/Z vs. Gp, etc.) for rate and reserves analysis
10. Use advanced decline curve and production data analysis for reservoir characterization: flow regime, hydrocarbons-in-place, permeability, skin, drainage area, fracture properties, etc.

1. Conventional decline curve equations: exponential, hyperbolic and harmonic rate versus time and rate versus cumulative production relationships, selecting the proper equation based on reservoir properties and drive mechanisms
2. The effects of transient production: how to recognize transient production, how transient forecasts can overestimate remaining reserves, how to properly constrain transient forecasts
3. Forecasting during displacement processes: using trends like water-oil ratio and versus cumulative oil production to estimate ultimate oil recovery, converting these trends into an oil rate versus time forecast
4. Difficult situations: layered and compartmented reservoirs, downtime, workovers, changing facility conditions and facility constraints, forecasting groups of wells, common mistakes
5. Production decline type-curves: Introduction and historical background on production decline type-curve methods, how to use modern decline type-curves to determine reservoir properties during both transient and stabilized production, using type-curve methods for forecasting future production

Cost: 1950 USD

Duration: 5 Days

• One-third to one-half of the original oil-in-place may remain in a reservoir as it reaches abandonment due to its economic limit. The primary reasons are: heterogeneity of the reservoir, unfavorable fluid properties, and inefficient nature of the displacement process, oil price, and production cost considerations.
• The secondary reasons, however, are: inappropriate development, inefficient reservoir management practices, and escalating costs of remedial interventions/corrective measures and producing operations.
• The oil recovery is generally lower than expected due to some combination of the above reasons. Gaining a better understanding of the reservoir fundamentals and the important variables that influence the recovery process can enhance it.
• This overview course aims to provide such an understanding. It presents the subject material with a clear focus on:
• developing and producing the reservoir efficiently within its complexity constraints, harnessing energies available within the reservoir-aquifer-injection system, realizing technical benefits and application limitations of the various EOR methods, and selecting the optimum time window.
• This course covers the recovery improvement possibilities that present themselves at all stages in the reservoir life cycle. It thereby enables one to timely select the most beneficial method and set realistic expectations on production behavior changes and recovery improvement.
• The impacts of the selected method on personnel training, technology transfer, and facility modification are also covered. The material is presented in simple terms that would enable a participant to understand what works where, what fails when, and why. It is light on theoretical equations, but it scrutinizes these to comprehend importance of significant parameters. It utilizes case studies from projects around the world; their analyses and interpretations aid the participant in understanding of the material. Many illustrative problems, worked in the class by teams, are helpful in gaining a better grasp of the subject matter.

Cost: 1950 USD

Duration: 5 Days

1. Summary of Basic Reservoir Engineering
2. Relative permeability measurement methods
3. Phase behavior of reservoir fluids
4. Equations of state
5. Fluid sampling and laboratory PVT tests
6. Prediction of phase behaviors and reservoir fluid properties
7. Condensate formation and growth
8. Critical condensate saturation, condensate banking, gravity drainage;
9. Water flood
10. Single and two phase inertial factor estimation methods.
11. Relative permeability variations with velocity & interfacial tension due to coupling (capillary number) and inertial effects.
12. Mechanistic models of coupling.
13. Relative permeability correlations and calculations for use in simulators and using the next generation (universal) method.
14. Steady state and pseudo-steady state flow equations.
15. Material balance equations.
16. Depletion for dry, wet and gas condensate systems.
17. Active aquifers and pressure maintenance.
18. High pressure and high temperature reservoirs.
19. Perforation and fracture characteristics and effective parameters.
20. Perforation and fracture design.
21. Estimation of skin for perforated, fractured, deviated and horizontal wells.
22. Well productivity calculations.
23. NeW-COIN demonstration.
24. Field application of fluid data in commercial ;

Cost: 1950 USD

Duration: 5 Days

1. Develop recovery expectations from reservoirs under primary depletion or pressure maintenance utilizing water or immiscible gas injection
2. Determine reasons and causes for less than theoretically possible recovery
3. Choose appropriate methods (with their target applications, benefits, and limitations) for improving oil recovery from reservoirs under primary depletion or pressure maintenance utilizing water or immiscible gas injection
4. Enhance oil recovery beyond waterflooding or immiscible gas injection project
5. Understand mechanisms responsible for recovery improvement in various EOR methods
6. Use miscible methods: injection of solvents (LPG/NGL injection, gases such as natural gas, carbon dioxide, nitrogen, flue, etc.) in the reservoir
7. Use chemical methods: injection of chemicals (polymers, surfactants, caustic soda, etc.) in the reservoir
8. Use thermal methods: introduction to heat (hot water, steam, combustion, inter-well, and huff-&-puff) in the reservoir Important variables that control recovery improvement in various EOR methods
9. Select EOR methods using screening criteria
10. Use designing procedures - theoretical, laboratory tests, and field pilots
11. Plan and implement EOR processes employing the proper empirical, analytical, and simulation tools
12. Forecast rate-time and recovery-time behavior under various EOR methods and analyze reservoir performance
13. Assess risks and ways to minimize their impact on project economics Monitor reservoir/well behavior 

• Reservoir life cycle and recovery process
• Life under primary recovery phase: recovery targets and ways to improve
• Life under secondary recovery phases: immiscible gas injection, water flooding, recovery targets, ways to improve
• Life under enhanced oil recovery phase: increasing complexity, cost/benefit consideration
• Miscible methods: selection criteria, recovery targets and why they are seldom met, design considerations, case studies
• Chemical methods: selection criteria, recovery targets and why they are seldom met, design considerations, case studies
• Thermal methods: selection criteria, recovery targets and why they are seldom met, design considerations, case studies
• Technical challenges: current and future R & D directions, facilities modifications and personnel training

Cost: 1950 USD

Duration: 5 Days

1.  Horizontal Wells
2. Extended Drawdown Testing
3. Permanent Downhole Gauges (PDHG)
4. Post Hydraulic Fracture Analysis
5. Slug Test Analysis
6. Injection Wells
7. Gas Condensate Wells

Cost: 1950 USD

Duration: 5 Days

1. Concepts of reservoir modeling
2. Integration of data in xmodeling
3. Deterministic and stochastic models
4. Static & dynamic modeling
5. Facies & fracture modeling
6. Porosity & permeability modeling
7. Concept of upscaling
8. Exporting results to reservoir simulators
9. Simulation techniques
10. Data needed for simulation
11. History matching
12. Reservoir forecasts

Cost: 1950 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation of Boilers and Performance as these most commonly used in the process and refinery industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO.
• For Boiler types, we focus on the mechanical and practical aspects.
• Many full details will be presented to get a full picture of Boiler technologies.
•  A basic training module for  Boilers Application and performance

• Understand The principle of Fire Tube and Water Tube Boiler design  
• Understand the principle of operation of ;
• Understand The principle of pressure vessels design          
• Understand Boilers Application and performance

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• ASME Section VIII pressure vessels
• ASTM A516 Grade 70 Plate is also called out as ASME SA516-70.
• A516 is primarily used for service in welded pressure vessels where improved notch toughness is required.

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation of Pumps, and Performance as these most commonly used in the process and refinery industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO. For Pumps types, we focus on the mechanical and practical aspects.
• Many case studies will be presented to show failures, to get a full picture of Pumps technologies.
•  A basic training module for other types of Pumps are included

• Understand The principle of  Pumps design
• Understand the principle of operation of Centrifugal, Reciprocating and Screw ;          
• Know Mechanical seal types,  Dry Gas Seals Design
• Understand Pumps Application and performance
• Understand Pumps standards and Codes

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 610  Centrifugal Pumps  for Petroleum, Chemical, and Gas Service Industries
• API 675 Positive Displacement Pumps - Controlled Volume
• API 676 Positive Displacement Pumps – Rotary  Pumps
• API 682 Pumps  Shaft Sealing Systems for Centrifugal and Rotary Pumps
• API 685 Seal less Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry
•  

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of  Project commissioning planning,
• Scheduling and resource management.
• Review and acceptance of Construction QA and Inspection and Test documentation.
• Ensuring Commissioning team is familiar with the project scope and requirements of the Commissioning Plan.
• Ensuring Operations knowledge and approval of the Commissioning scope. Facilitating coordination meetings with Operations.
• Providing the communication interface with the stakeholders (Engineering, constructions,-----
• Facilitating site Hazard Assessment,

• Know the key elements of project   Commissioning
• Apply the  Commissioning Management and Organization Chart
• Understand and review Project Phases
• Know and apply the Pre Commissioning, Commissioning and Start-up 
• Prepare Check –Lists
• Prepare Check -Lists
• Review the As-Built P&IDs
• Equipment Data Sheets
• Updated Operating Procedures
• Review Construction & Generate Punch-Lists

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• Asme section ix - b ,  - Asme   b , - Asme   b , Asme , Asme ,ASME , ASME ,Api 1104, Api 570, Astm, Ansi.
• API 617 Centrifugal Compressors for Petroleum, Chemical and Gas
• Guidance on Industry Standard for ISO 13707 Reciprocating Compressors (API 618)
• GIS 34-503 Guidance on Industry Standard for ISO 10441 Special Purpose Couplings
• Gas Seal Systems (API 614).
• GIS 34-303 Guidance on Industry Standard for API 616 Gas Turbine
• GS 134-6 Reciprocating Compressors to API 618
• ASME PTC 9 Displacement Compressors, Vacuum Pumps, and Blowers.
• Guidance on Industry Standard for API 619 Rotary Type Positive Displacement Compressors
• A RE-COMP-619-P Rotating Equipment—Compressors—API 619 Rotary—Procurement
• Guidance on Industry Standard for API 681 Liquid Ring Vacuum Pumps and Compressors
• API 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; ISO 13709 Adoption

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation of   Pressure Vessels, Heat Exchangers, Tanks, Valves and Filters and Performance as these most commonly used in refinery and oil and gas industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO.
• And specify the proper material; we focus on the mechanical and practical aspects.
• Many case studies will be presented to show failures, to get a full picture of   Pressure Vessels, Heat Exchangers, Tanks, Valves and Filters technologies.

• Understand The principle of  Pressure Vessels, Heat  Exchangers , Tanks, Valves and Filters design  
• Understand the principle of operation of Pressure Vessels, Heat Exchangers, Tanks, Valves and ;  
• Understand   Pressure Vessels, Heat Exchangers, Tanks, Valves and Filters design  application and performance
• Understand  How to apply Maintenance and tests of  Pressure Vessels, Heat Exchangers , Tanks, Valves and Filters 

• Mechanical, Production Senior Technicians
• New Engineers
• Senior Engineers,
• Process Engineers,
• Section Heads,

• ASME Section VIII pressure vessels
• API 660 - Shell and Tube
• API 661 - Air Cooled Heat Exchangers
• API 662 - Plate and Frame

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation and Maintenance of Gas Turbine Performance maintenance practices as these most commonly used in the process and refinery industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO. For Gas Turbine, we focus on the mechanical and practical aspects.
• Many case studies will be presented to show failures, to get a full picture of Gas Turbine
• Provide details of Alignment Preparation check list and How to Check Alignment procedures of rotary Equipment.

• Apply Mechanical Maintenance of Gas Turbine
• Understand the principle of operation of Gas Turbine
• Understand Gas Turbine Application 
• Understand Gas Turbine Standards and Codes
• Understand  Centrifugal , Axial flow  anti- surging systems
• Understand  compressors Standards and Codes
• Understand Alignment Preparation check list and How to Check Alignment procedures of rotary Equipment.

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 617 Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
• API  STD 616     Gas Turbines for Petroleum,  Chemical, and Gas Industry Services
• API   RP 11PGT  Recommended Practice for  Packaged Combustion Gas Turbine           

Cost: 2200 USD

Duration: 4 Days

•  This training course is a simplified course of Maintenance of plant Equipment and Machinery
•  The course will provide details on Managing and Coordinating All maintenance of rotary and stationary equipment activities.
• Preparation and implementation of preventive and conditional maintenance programs
• A case studies will be presented and how to manage the optimum solution to apply Equipment maintenance with the maximum safety conditions and practical aspects.
• Providing the Types of Couplings, Alignment Preparation check list
• How to Check Alignment procedures of rotary Equipment.

• Know and apply Preventive & Corrective Maintenance Integration
• Know the plant Maintenance Strategies
• Review the Stationary equipment Process Performance
• Review the Rotary equipment Process Performance
• Know and apply Proactive and predictive Maintenance
• Reliability Centered Maintenance (RCM)
• Know Maintenance Philosophy
• Know  and apply Computer Maintenance Management( CMM )
• How to Check Alignment procedures of rotary Equipment.

• Mechanical, Production Senior Technicians
• New Engineers
• Senior Engineers,
• Process Engineers,
• Section Heads,

Cost: 2500 USD

Duration: 5 Days

• Understand The principle of Fire Tube and Water Tube Boiler design  
• Understand the principle of operation of ;
• Understand The principle of pressure vessels design          
• Understand Boilers Application and performance

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• ASME Section VIII pressure vessels
• ASTM A516 Grade 70 Plate is also called out as ASME SA516-70.
• A516 is primarily used for service in welded pressure vessels where improved notch toughness is required.

Cost: 1100 USD

Duration: 3 Days

• New Engineers ((Mechanical)
• Senior maintenance supervisors,
• Design Engineers,
• Process Engineers,
•  Section Heads
• Department Heads

Cost: 2500 USD

Duration: 5 Days

• Understand Mechanical seals types
• Understand The principle of operation of the  Dry Gas Seals 
• Know Dry Gas Seals Design and the forces acting upon the seal in operation               
• Know Benefits of using instead of Traditional oil sealing                  
• Understand Hydraulic Balancing mechanical seals

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

Cost: 2200 USD

Duration: 4 Days

• Apply analysis techniques used to investigate and resolve reliability-related problems.
• Understand the basic methodology for conducting a root cause failure analysis (RCFA).
• Understand R C A  Analysis and Break Breakthrough Strategy
• Know  Equipment Design and Troubleshooting Evaluation Guide
• Apply precisely Rotary Equipment  Alignment  using the standard software  

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• Mobley, R. Keith, 1943 –
• Root cause failure analysis / by R. Keith Mobley.
• Includes index.
• ISBN (alk. paper) 

• Post assessment

Cost: 2500 USD

Duration: 5 Days

• Understand The principle of  Pumps design
• Understand the principle of operation of Centrifugal, Reciprocating and Screw ;          
• Know Mechanical seal types,  Dry Gas Seals Design
• Understand Pumps Application and performance
• Understand Pumps standards and Codes

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 610  Centrifugal Pumps  for Petroleum, Chemical, and Gas Service Industries
• API 675 Positive Displacement Pumps - Controlled Volume
• API 676 Positive Displacement Pumps – Rotary  Pumps
• API 682 Pumps  Shaft Sealing Systems for Centrifugal and Rotary Pumps
• API 685 Seal less Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry

Cost: 2500 USD

Duration: 5 Days

• Understand Mechanical seals types
• Understand The principle of operation of the  Dry Gas Seals                
• Know Dry Gas Seals Design and the forces acting upon the seal in operation               
• Know Benefits of using instead of Traditional oil sealing                  
• Understand Hydraulic Balancing mechanical seals                                                 

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

Cost: 2500 USD

Duration: 5 Days

• Know and apply Preventive & Corrective Maintenance Integration
• Know the plant turnaround  maintenance programs
• Review the Stationary equipment Process Performance
• Review the Rotary equipment Process Performance
• Know and apply Proactive and predictive Maintenance
• Reliability Centered Maintenance (RCM)
• Know Maintenance Philosophy
• Know  and apply Computer Maintenance Management( CMM )
• Know how to Do perfect  rotary  Equipment Alignment ,

• Production  Senior Technicians
• Maintenance  Senior Technicians  
• New Engineers
• Senior Engineers,
• Process Engineers,
• Section Heads,

Cost: 2500 USD

Duration: 5 Days

• Understand the major parameters affecting the Compressors selection
• Understand The principle of operation of Centrifugal , Axial flow, Reciprocating and Screw ;          
• Know Mechanical seal types,  Dry Gas Seals Design
• Understand  Centrifugal , Axial flow compressors  surging  phenomenon
• Understand  Centrifugal , Axial flow  anti- surging systems
• Understand  compressors Standards and Codes

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 617 Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
• API 618 Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services
• API 619 Rotary Compressors for Petroleum, Petrochemical, and Gas Industry Services
• API 681 Liquid Ring Vacuum Compressors for Petroleum,  Petrochemical, and Gas Industry

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Project commissioning planning, Scheduling and resource management.
• Review and acceptance of Construction QA and Inspection and Test documentation.
• Ensuring Commissioning team is familiar with the project scope and requirements of the Commissioning Plan.
• Ensuring Operations knowledge and approval of the Commissioning scope. Facilitating coordination meetings with Operations.
• Providing the communication interface with the stakeholders (Engineering, constructions, -----
• Facilitating site Hazard Assessment,

• Know the key elements of project Commissioning
• Apply the Commissioning Management and Organization Chart
• Understand and review Project Phases
• Know and apply the Pre-Commissioning, Commissioning and Start-up 
• Prepare Check –Lists
• Prepare Check -Lists
• Review the As-Built P&IDs
• Equipment Data Sheets
• Updated Operating Procedures
• Review Construction & Generate Punch-Lists

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• Asme section ix - b ,  - Asme   b , - Asme   b , Asme , Asme ,ASME , ASME ,Api 1104, Api 570, Astm, Ansi.
• API 617 Centrifugal Compressors for Petroleum, Chemical and Gas
• Guidance on Industry Standard for ISO 13707 Reciprocating Compressors (API 618)
• GIS 34-503 Guidance on Industry Standard for ISO 10441 Special Purpose Couplings
• Gas Seal Systems (API 614).
• GIS 34-303 Guidance on Industry Standard for API 616 Gas Turbine
• GS 134-6 Reciprocating Compressors to API 618
• ASME PTC 9 Displacement Compressors, Vacuum Pumps, and Blowers.
• Guidance on Industry Standard for API 619 Rotary Type Positive Displacement Compressors
• A RE-COMP-619-P Rotating Equipment—Compressors—API 619 Rotary—Procurement
• Guidance on Industry Standard for API 681 Liquid Ring Vacuum Pumps and Compressors
• API 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; ISO 13709 Adoption

Cost: 2500 USD

Duration: 5 Days

• Gas density and temperature effects
• Gas and condensate densities and pressure effect
• Vapor pressure
• Viscosity

• Standard and Codes
• Head Loss Equivalents

• Valves types and selection criteria.

• Standards and Codes
•   Centrifugal Compressor Properties
•   Compressor Selection
• Compressors componen

• Abbreviations & Specifications
• Piping specifications.
• Process piping arrangements.
• Compressors troubleshooting

• Pressure vessel types, 
• Basic components, and applications;
• Design codes, standards and specifications
• Vessel Shells
• Heads
• Nozzle openings and reinforcement
• Flanges, Supports, Internals
• Horizontal Volume Shell, head, calculations
• Spheres Volume, calculations

Cost: 2500 USD

Duration: 5 Days

• Oil density and temperature effects
• Gas and condensate densities and pressure effect
• Flash point
• Vapor pressure
• Viscosity

• Pumps Types
• Code and Standards
• Function Of Pumps
• Centrifugal pumps Performance curve
• Rotary Pump
• Reciprocating Pumps

• Abbreviations & Specifications
• Piping specifications.
• Process piping arrangements.
• Pumps troubleshooting

• Tank Types.
• Tanks Standards
• Fixed-roof tank
• Floating Roof
• Tanks piping fitting
• Tank Mixers Arrangement
• Pressure/Vacuum Valves

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

• Tanks types.
• Tank Standards – General.
• Storage Tanks Symbols
• Fixed-roof tanks
• Floating Roofs
• Major Design Criteria
• Refrigerated Storage
• Tanks piping fitting classification

• Tank bottoms.
• Tank Shells.
• Tank Roofs.
• Venting Of Fixed-Roof Tanks
• Air Baffles
• Pressure/Vacuum Valves
• Automatic Bleeder Vents
• Internal Floating Covers (IFC).
• Tank Pads.
• Bund Walls.
• Pressure/Vacuum Valves                     

• Maintenance HSE General Requirement
• External Maintenance of Tanks.
• Internal Maintenance of Tanks.
• External and Internal Painting
• Fiber Glass Lining
• Tank Cleaning
• Fiber Glass Lining
• Tank Cleaning
• Safe Sludge Cleaning
• Tank Mixers Arrangement
• Equipment performance Indicator

• Explosive Air/Vapor Mixture.
• Ignition Sources.
• Static Electricity
• Pyrophoric Iron Sulphide
• Spark Formation By Striking Of Metal Objects
• Tank Testing
• Cathodic Protection

Cost: 2500 USD

Duration: 5 Days

Cost: 2200 USD

Duration: 4 Days

• Discusses various factors influencing the design of a pressure vessel
• Material selection Pressure Temperature Corrosion allowance Stress
• Vessel orientation Weld joint efficiencies

• Lists and steps in the design process of each component of a pressure vessel Shells
• Heads
• Stiffening rings
• Nozzle openings and reinforcement
• Flanges, Supports, Internals

• Describes the role of the engineer in preparing purchasing specifications,
• methods for testing pressure vessels, and types of vessel certification

• Simple calculations for pressure vessels design
• Process requirements
• Horizontal Volume Shell, head, calculations
• Spheres Volume, calculations
• Heat Exchangers types
• TEMA standard

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

1. Aircraft propulsion,
2. Oil and gas pipeline pumping
3. Offshore  platforms
4. Utility  power  generation
5. Ship  propulsion
6. Equipment Prime mover

1. Air in the compressor stages.
2. How pressure buils up through the compressor stages.
3. Flue gas in the turbine stages.
4. Air in the combustion chamber

1. Gas Turbine Thrust balance
2. Bearings

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

• Principle of operation
• Packing seals and its disadvantages      
• Mechanical seal types
• Mechanical seal function and component
• Hydraulic Balance

• Quenching
• Flushing
• Circulation
• Barrier fluid
• Ancillaries

• Preparation
• Precautions
• Checks
• Measurements

• Principle of operation
• Design
• Operating concept and precautions
• Self adjusting theory
• Auxiliaries

Cost: 2500 USD

Duration: 5 Days

•  Compressor Properties
• Compression Theory
• Compressor Selection
• Compressors components
• Compressor Operation

• Positive Displacement Compressor
• Reciprocating Compressors
• Rotary Compressor

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

Cost: 850 USD

Duration: 5 Days

1. Exploration and production of an oil/gas well.
2. Geology and geophysics, how oil and gas is formed
3. Reservoir engineering
4. Drilling Rigs types rotary table vs top drive
5. Rig operations
6. Drilling fluids, Mud types
7. Directional drilling operations
8. Measurements while drilling
9. Telemetry services
10. Logging while drilling fundamentals
11. Gamma measurements
12. Resistivity tools types and measurements
13. Density and porosity measurements
14. Acoustic measurements
15. Imaging services
16. Nuclear Magnetic resonance
17. Cementing services
18. Coiled tubing and its types
19. Artificial lift
20. Well head operations
21. Well stimulation

Cost: 2250 USD

Duration: 5 Days

• This two days course gives an overview and introduction about Petroleum industry and its importance on world economics.
• The course will highlight the pricing, global reserves and energy trends nowadays. Will discuss the oil and gas exploration and its effect on organizational success and will go through the basics of drilling and evaluation and reservoir engineering.
• The course will highlight the procedures for maximizing Oil &Gas field, new field development and opportunities for production optimization
• Importance of the industry plays on world economic

Cost: 950 USD

Duration: 2 Days

1. MWD Tool History
2. MWD Tool assembly and components
3. MWD Probe tools applications
4. MWD Collar based tool applications
5. Tools communications with surface systems
6. Tool memory dump and log production
7. MWD surface hardware rig-up
8. MWD Unit installation and pressurization
9. Gamma ray tool types
10. Gamma ray measurements and applications
11. Resistivity tool types
12. Resistivity tools measurements and applications
13. Density-Porosity tool types
14. Density-porosity measurements and applications
15. Resistivity Imaging “HD”
16. Density imaging
17. Azimuthal caliper imaging
18. Acoustic tools
19. Acoustic measurements and applications
20. Nuclear magnetic resonance applications
21. Formation tester and sampling applications
22. Seismic while drilling measurements and applications
23. Near bit Gamma service applications
24. Near bit resistivity service applications

Cost: 2250 USD

Duration: 5 Days

1. Surface logging services
2. Drilling fluids (Mud) Types
3. Remote operation services
4. Conventional drilling services
5. Types of drilling motors
6. Advanced drilling services
7. Rotary steerable services
8. Drilling optimization strategy and services
9. Wellbore positioning services
10. Measurements while drilling services (MWD)
11. Telemetry tools
12. Surface Software & hardware
13. Logging while drilling (LWD) equipment and benefits
14. Coring services and equipment
15. Casing drilling
16. Liner drilling
17. Re-entry services
18. Coil tubing
19. Directional drilling and M/LWD Job HS&E requirements on rigsite

Cost: 2250 USD

Duration: 5 Days

1. How to comprehend drilling and workover reports
2. What can be done within open-hole and cased wells, as a part of reservoir management
3. How drilling practices can optimize cash flow and ultimate recovery
4. How to communicate with drilling and production personnel

1. Overview of the drilling process
2. Language of drilling, completing, and well intervention
3. Drill string components: bits and accessories
4. Drilling fluids and hydraulics
5. Hole problems, stuck pipe, side-tracking and fishing
6. Cores and coring
7. Electric logging, MWD, LWD
8. Casing design and installation
9. Primary and remedial cementing
10. Directional, horizontal, multilateral and under-balanced drilling
11. Wellhead equipment and trees
12. Options for completions and workovers
13. Tubing, packers and completion equipment
14. Safety and flow control devices
15. Open hole completions
16. Perforating
17. Coil tubing operations
18. Wireline techniques
19. Well stimulation - surfactants, solvents, acidizing, hydraulic fracturing
20. Formation and sand control - mechanical retention, chemical consolidation, and gravel packing
21. Scale and corrosion
22. Directional drilling and multi-laterals
23. Scale and corrosion
24. Paraffin and asphaltenes

Cost: 2250 USD

Duration: 5 Days

1. Study and discussion on Reservoir types and Productivity.
2. Analysis and study of Well Productivity impairment.
3. Study in details Well Inflow and Outflow Performance
4. Work on Total Well Optimization Systems
5. Review of Production Logging applications & Techniques
6. Discussion and practice of Water production/control & Productivity effects
7. Discussion and practice of Formation damage during drilling,
8. Study Productivity and effect of Matrix Stimulation (Acidizing)
9. Study and discussion of Productivity  and the effect Hydraulic Fracturing
10. Technology
11. Review and practice of Candidate Selection & Stimulation
12. Study and Practice of Productivity Enhancement through Artificial Lift
13. Electrical Submersible Pumps (ESP) System
14. Progressive Cavity Pump Artificial Lift  System
15. Sucker Rod Pumping Artificial Lift System
16. and Other Systems
17. Review and Practice Productivity enhancement with Through-Tubing Techniques
18. Study and Practice of Sand Production Control Design and Productivity Effects.
19. Study and practice of Flow Assurance: Paraffins and Asphaltene: Diagrams, theory, Problems and Solutions, Scale deposition: Diagrams, Control, and new Technologies, Emulsion problems and Corrosion.

Cost: 2250 USD

Duration: 5 Days

1. Well inflow performance and its impact on processing facilities
2. About oil, gas, and water compositions and properties needed for equipment selection and sizing
3. How to select and evaluate processes and equipment used to meet sales or disposal specifications
4. How to apply physical and thermodynamic property correlations and principles to the design and evaluation of oil production and processing facilities
5. How to perform equipment sizing calculations for major production facility separation equipment
6. How to evaluate processing configurations for different applications
7. How to recognize and develop solutions to operating problems in oil/water processing facilities

1. Overview of upstream oil and gas production operations;
2. Fluid properties and phase behaviour;
3. Overview of artificial lift;
4. Processing configurations; Phase separation of gas, oil, and water;
5. Emulsions; Sand, wax, and asphaltenes; Oil treating; Field desalting;
6. Crude stabilization and sweetening;
7. Crude oil storage and vapour recovery;
8. Measurement and transportation of crude oil;
9. Produced water treating; Compressors;
10. Water injection systems;
11. Relief and flare systems;
12. Overview of solution gas processing (Sweetening, Dehydration, NGL Recovery)

• Engineers (well completion engineer, production engineers, reservoir engineer and field engineer), and well-site geologist, and other staffs from an operating and/or service and/or consultant and/or engineering company involved in petroleum production operation process.
• Engineers and technical personnel involving with appraisal or field development project, and/or reservoir management team intending to enhance their technical skills and level of confidence in decision making by identifying well problems issues, causes of production anomalies; various operational constraints etc.
• Engineers from an operating and/or service and/or consultant and/or engineering company requires improving their technical skills with high level of confidence to adapt appropriate technology to optimize the production performance and better reservoir management.
• Surface facility engineers from an operating and/or service and/or consultant and/or engineering company getting necessary knowledge to design or operate the equipments and facilities.
• Technical, project and commercial managers, staff responsible in the production development, evaluation and field operation for oil and gas facilities operation

Cost: 2250 USD

Duration: 5 Days

1. Better understand rock properties and rock mechanics related to fracturing applications
2. Better understand fracturing fluid mechanics and proppant transport
3. More effectively design fracturing treatments through better understanding of factors influencing hydraulic fracturing applications
4. Use pre-frac injection test data and real-time fracturing treatment data in fracturing applications to define fracture parameters and improve frac treatment design
5. Consider factors influencing post-frac fracture conductivity and well cleanup
6. Realize the strengths and limitations of existing hydraulic fracturing technology and fracture models
7. Expand fracturing applications to fit a wider range of reservoir types and conditions

1. Rock properties and fracture mechanics related to the fracturing process
2. Fracturing fluid mechanics
3. Proppant transport
4. Pre-frac injection test analysis
5. Fracture closure
6. Fracture monitoring and fracture measurement
7. Fluid leak-off
8. Re-fracturing considerations
9. Review of existing fracture modeling software
10. Evaluation of post-frac well performance

Cost: 2250 USD

Duration: 1 Day

1. Analysis for the world areas major reserves of heavy oil and economic impact in the production of heavy oil.
2. To learn the technical, mathematical and commercial aspects of heavy oil for field application.
3. To learn the technical and legal aspects of transporting heavy oil by super tankers.
4. Paraffin Crystallization and Asphaltene Flocculation/ Chemical of Paraffin and Technology.
5. To study Emulsions and to learn how and why the content of water in the crude oil affects the production efficiency.
6. To perform an in depth study of all the methods applied in field operations to produce heavy crude oil.
7. To learn how the Flow improver works and when to be used in heavy oil Production
8. To learn the mathematical principle of a heavy oil production model and how to apply it to field conditions.
9. The practical application of the matematical model and the design of a production system to produce heavy oil efficiently.
10. To design and how to implement in the field an optimization system to produce heavy oil.
11. To review and clarify important concepts and mathematical aspects related to heavy oil ;

Cost: 1950 USD

Duration: 5 Days

1. Introduction
2. Conventional oils & their future
3. The nature of heavy oil
4. Global heavy oil development (onshore and offshore)
5. Industry trends & challenges
6. Overview of heavy oil geology
7. Heavy oil sampling
8. Heavy oil phase behavior and laboratory measurements methodologies
9. Heavy oil workflows
10. Recovery processes overview
11. The primary recovery processes - Horizontal and Multi Lateral Wells and Cold Heavy Oil Production with Sand (CHOPS)
12. The non thermal recovery processes - Waterflood, Chemical Flood and Vapor Extraction (VAPEX)
13. Thermal recovery processes - Cyclic Steam Stimulation (CSS), Steam Flood, Steam Assisted Gravity Drainage (SAGD), Fire Flood/In Situ Combustion
14. Newly developed recovery processes - Toe to Heel Air Injection (THAI), THAI with solid catalyst (CAPRI), Steam Solvent Based Hybrid processes
15. Field examples
16. Heavy oil production, completion overview
17. Lifting methods - Gas Lift, Sucker Rod Pumps, Progressive Cavity Pumps (PCP) and Top Drive PCPs, Hydraulic Pumps, Electrical Submersible Pumps (ESP), High Temperature ESP (Red Hot Pumps).
18. Well completions 
19. Sand management strategy and sand control techniques
20. Field Examples
21. Basic heavy oil production and processing schemes
22. Emulsion control and treatment
23. Facilities design and operations for heavy oil processing
24. Onshore and offshore heavy oil loading systems
25. Heavy oil transportation and storage options
26. Flow assurance in heavy oil production and transportation

• This introductory course on heavy oil exploitation is designed to benefit multidisciplinary asset teams including geologist, geophysicist, reservoir, drilling, production, completion and facilities engineers. This course will also benefit all managers and department heads.

Cost: 1950 USD

Duration: 5 Days

• Study the rheology of heavy oils, Application of technical of Dilution by using diluents to optimize the transportation
• Pipeline design including thermal insulation calculation and power pumping system and at the same time to study the new technology to transport heavy oil and Paraffinc crude oil
• The study of conventional methods and operational problems associated use of those with the use of those methods in the production of heavy oil areas
• The study of theoretical field constituted by six wells producing different types of heavy crude oils at different rates of production.

Cost: 1950 USD

Duration: 5 Days

1. Mineralogical description & rock properties.
2. Possible causes of formation damage
3. Formation damage during drilling / Completion operations
4. Formation damage evaluation
5. Damage removal by Stimulation (Acidizing / Fracturing)
6. Stimulation overview
7. Matrix acidizing design / evaluation
8. Real case histories and exercises on damage quantification

Cost: 1950 USD

Duration: 5 Days

1. Reservoir -Integrated Production System
2. Well Completion Methods
3. Classification of Reservoir Based on the Fluids in the Reservoir
4. Completions Effects
5.  Flow in Pipes
6. Choke Performance
7. Systems Analysis
8. Tubing Design
9. Completion String Design
10. Completion Equipment
11. Casing and Casing Suspension
12. Wellheads
13. Tubing Selection
14. Tubing Connection
15. Packers
16. Wellsite Operation
17. Subsea Completions
18. Present Systems
19. Subsea Applications
20. Flow Assurance (Paraffin and Asphaltene)
21. Requirement Designs and Types
22. Subsea Controls Systems
23. Flowline Connections
24. ROVs
25. Well testing overview
26. Introduction to Well Testing and Interpretation
27. Well Testing Procedures and Hardware
28. Examples of Typical Flow regimes
29. Well Test Objectives
30. Reservoir Description
31. Reservoir responses
32. Well Test Types
33. Completion Test
34. Drill Stem Test
35. Surface Equipment
36. Downhole Tools

Cost: 1950 USD

Duration: 5 Days

1. Understand the type of data used in processing (seismic vs non seismic)
2. Understand ways of viewing / sorting / manipulating seismic data and domains shot, cmp and offset domains.
3. Understand the concepts of testing parameters
4. Describe a processing sequence and signal processing techniques applied.

1. Introduction – definition of main steps involved in seismic processing – review of basic mathematics tools applied to the data. Description of reformatting and preprocessing.
2. Geometry update - definition of processing domains. Mutes & amplitude corrections. Q compensation. Deconvolution. Designature. Zerophazing. Dual sensor summation.
3. Noise characterization and attenuation. Modeling of the weathering zone - primary and residual statics corrections.
4. Seismic velocities. Velocity analysis. NMO Corrections. Anisotropy. Multiples characterization and attenuation. Regularization principles.

Cost: 1950 USD

Duration: 5 Days

1. Introduction: philosophy and history
2. Geophysical fundamentals
3. Breaking out operational sequences
4. Introduction to fault interpretation
5. Chronostratigraphy construction and interpretation
6. Sea level curves, accommodation space, and cycle orders
7. Vail sequence theory and sequence hierarchy
8. Carbonate sequences
9. Siliciclastic sequences
10. Seismic facies
11. Paleo-environmental analysis
12. Geohistory reconstruction
13. Optimizing exploration

Cost: 1750 USD

Duration: 5 Days

1. Basics: geological controls on the propagation, reflection, and refraction of seismic waves
2. Data acquisition and processing with emphasis on its potential impact on interpretation
3. 2D and 3D interpretation techniques
4. Seismic interpretation of different structural styles: extensional, compressional, strike-slip, inverted, salt, and gravity dominated basins
5. Seismic velocities
6. Sequence stratigraphy and seismic facies analysis
7. Acoustic impedance
8. DHIS
9. AVO
10. Understand the seismic process, interpret seismic sections, develop a geologic model, and prepare maps
11. Relate the subsurface stratigraphy to well data
12. Identify different structural styles from seismic data
13. Create a basic stratigraphic framework using seismic stratigraphy

Cost: 1750 USD

Duration: 5 Days

• Understand the various types of velocities, their calculation, and the validity of their interpolation and extrapolation
• Compare, quality control, smooth, and combine the various velocity types into an integrated velocity model
• Validate model quality by examining the changes in velocity needed to tie the seismic
• Use the model to convert horizons, faults, and seismic data from time to depth
• Understand at an introductory level, how velocity models are used for other studies such as forward modeling and pore-pressure prediction

1. Velocity: definition and comparison of the many types of velocity including average, interval, RMS, stacking, migration, P-wave, and S-wave
2. Velocity Inputs: accuracy and regional extent of each, including check shots, VSPs, sonic logs, time/depth functions, well picks and pseudo velocities, seismic velocities, and horizons for structural control
3. Synthetic Seismograms: creation, upscaling, and tie to seismic data. Advanced synthetics including synthetic gather creation, Zoeppritz equations, AVA, and AVO
4. Matching Synthetics to Seismic: calibrating the seismic data to the well data
5. Seismic Velocities: semblance analysis, velocity picking, multiples, and how seismic velocities differ from well velocities
6. Migration and Migration Velocities: introduction to pre- and post-stack algorithms, tomography, and iterative velocity analysis
7. Velocity Model Building: workflows to integrate stacking velocities, time/depth curves, well picks associated with seismic horizons (pseudo-velocities), and structure from horizons
8. Time-to-Depth Conversions: vertical stretch, inverse raytracing, migration, and uncertainty
9. Introduction to Advanced Topics: anisotropy, pore-pressure prediction, geostatistics, and forward modeling

• Early-career geoscientists and engineers, especially seismic interpreters, and anyone who needs to understand the basic theory and procedures for creating velocity models and converting seismic data from time to depth.
• This is a foundation level course. It is neither designed nor paced for the experienced velocity modeler or processor.

Cost: 1950 USD

Duration: 5 Days

1. Detailed discussion on how to select appropriate acquisition parameters and processing flow to properly record and preserve AVO and seismic attribute anomalies
2. Demonstration and discussion of blocking logs using zonation, mean and variance methods to develop AVO/AVA and attribute models. How to extract interval velocities from stacking velocities through ray-tracing in the presence of dip. Discussion on how to select appropriate wavelet for modeling
3. Prediction of AVO/AVA and attribute responses using properly generated models and comparison with AVO/AVA extracted from seismic data
4. Extensive discussion of pitfalls in AVO and seismic attributes and how to avoid them throughout this presentation
5. Geo-statistics analysis (This step including variograms analysis and trends determination).

1. Exercises on the tuning thickness effect on AVO, extraction of rock properties (λ μ ρ), AVO interpretation and cross plotting techniques, thin bed thickness estimation from amplitudes and related pitfalls, absorption due to thick reservoir, and many other topics
2. Group discussion and selection of acquisition parameters and processing flow for AVO and attributes
3. Group discussion to develop a risk analysis spreadsheet for AVO which encompasses all factors in acquisition, processing, modeling, and interpretation
4. Group discussion and exercise on how to select appropriate attributes for analysis over a prospect

1. AVO Concept and related factors
2. AVO pitfalls and assumptions
3. Petrophysics and AVO
4. Rock properties and wave propagation
5. Hydrocarbon detection using AVO
6. AVO modeling and processing
7. Impact of processing on AVO analysis
8. Techniques for interpretation of AVO
9. AVO Cross-plotting techniques 
10. Case studies of AVO
11. Seismic attributes and wave factors
12. Decon and scaling effect on attributes
13. Time and Frequency domain attributes
14. Thickness using amplitude
15. Thin bed thickness from frequency
16. Applications of amplitude, energy and frequency related attributes
17. Pitfalls of attributes

Cost: 1950 USD

Duration: 5 Days

1. Overview of 3-D data acquisition and processing
2. Principles of 3-D migration
3. Horizontal and horizon slices
4. 3-D modeling
5. 3-D seismic technologies
6. Reduced risk using 4-D
7. Successful applications of 3-D in E&P
8. Geostistical Kriging and variogram
9. Anisotropy, 3-D, 3-C, S-waves
10. Principles of structural & stratigraphic Interpretation
11. Application of seismic attributes
12. Thickness estimation using amplitude modeling, and frequency
13. Reservoir management using 3-D
14. Summary of 3-D seismic case histories from around the world

1. Utilize essential procedures in structural and stratigraphic interpretation
2. Apply fundamental principles of structural and stratigraphic interpretation
3. Use Geostatistical Kriging
4. Use S-waves in fractured reservoir interpretation
5. Estimate thin bed thickness with 3-D data
6. Make use of reservoir characterization and compartmentalization tools
7. Conduct risk analysis of 4-D data

Cost: 1950 USD

Duration: 5 Days

1. Simple imaging using zero-offset data, with the use of the NMO equation and Dix interval velocities
2. Concept of zero-offset migration
3. Artifacts introduced by migrating incomplete data, including 2D data
4. Role of velocity in migration
5. Kirchhoff and reverse-time, zero-offset migration algorithms
6. Fourier transform (amplitude and phase), convolution and correlation
7. Normal moveout correction and stack to convert data to zero offset
8. Noise
9. Estimation of stacking velocities
10. NMO and stack’s failures
11. Kirchhoff before-stack migration
12. Three imaging conditions and before-stack, wave-equation migration algorithms
13. Multiple attenuation and role of wide-azimuth acquisition geometry in multiple attenuation
14. Statics, land and marine
15. Amplitude corrections
16. 1-D and 2-D filtering, including f-k filtering
17. Wavelets and Deconvolution
18. The Fresnel zone
19. Improving spatial resolution
20. Improving resolution of depth estimation
21. Sample processing sequences
22. Ramifications of processing decisions

• Geophysicists work with Processing, Acquisition, and interpretation that are actively involved in seismic processing and/or liaise with seismic processing contractors.
• Geophysicists who are involved in special studies should have a thorough understanding of conventional processing.

Cost: 1950 USD

Duration: 5 Days

• Porosity and velocity
• Effect of clays on velocities
• Invasion, fluids
• Simple mixing laws (Voigt, Reuss, etc)
• Critical Porosity
• Hashin-Shtrikman bounds
• Fluid substitution ; Gassmann equation
• Fluid mixing; patchy saturation

• Vp and Vs; Poisson’s ratio
• Using M instead of K if no Vs
• Sonic and Dipole logging
• Seismic processing
• Post-stack attributes
• Interval attributes
• Unique attributes

• Pre-stack seismic processing
• Model scenario of production
• Pressure-dependence of properties
• Angle-dependent rock physics
• Pre-stack attributes
• 3-term and 2-term approximations
• Lamda-rho etc

• Fluid properties
• Spreadsheet solutions
• Rocks and fluids
• Empirical relationships
• Acoustic inversion
• Case study of time-lapse monitoring
• Elastic inversion
• Stochastic approaches
• Rock physics templates

• Kuster-Toksoz “crack” model
• Coal as a special example
• Xu and White model for shaly rocks
• Other models for shaly rocks
• Petrophysical Inversion
• Importance of scale
• Phantom horizons
• Carbonate rocks
• Heavy Oil
• Spectral content
• Thin-bed problems

Cost: 1950 USD

Duration: 5 Days

• Seismic exploration is one of the most powerful techniques for subsurface imaging. Through the study of acoustic waves propagated through the Earth's layers and echoed back to the surface, we can learn about the structure, Stratigraphy, and lithology of the Earth. This course will provide first-hand experience with seismic data acquisition, processing, and interpretation.
• Upon completion of this training course, participants will be able to understand:
• The seismic Exploration Methods.
• The Basic Principles of Seismic Exploration.
• Basic Seismic Data Acquisition.
• Basic Seismic Data Processing.
• Basic Seismic Data Interpretations.

1. Introduction and Theoretical Background; Introduction & Geophysical Methods
2. Seismic Waves; Propagation Concepts, Classification, Wave Elements, Ray Paths,
3. Ghost & Multiple Reflections, Refraction, Diffraction, Attenuation, Velocity& Reflection Coefficient
4. Overview of Seismic Data Acquisition; Acquisition Fields, Systems, Geometries & Data Recording
5. Noises Affecting Seismic Recording; Classification of Noises & Noises Examples
6. Overview of Seismic Data Processing; Demultiplexing, Gain Recovery, AGC, Trace Editing & Muting, Static Corrections, Deconvolution, Filtering, NMO, Migration, etc
7. Overview of Seismic Data Interpretation; 2D & 3D, Seismic-Well Tie, Structural & Stratigraphic Interpretation, AVO, Spectral Decomposition, Coherency, etc

• Professionals who want to understand what is all about Basic Seismic Survey,Techniques.
• Junior Geophysicists, Geologists, Petroleum Engineers.

Cost: 1950 USD

Duration: 5 Days

• Introduction and Theoretical Background; Introduction & Geophysical Methods
• Seismic Waves; Propagation Concepts, Classification, Wave Elements, Ray Paths,Ghost & Multiple Reflections, Refraction, Diffraction, Attenuation, Velocity & Reflection Coefficient
• Overview of Seismic Data Acquisition; Acquisition Fields, Systems, Geometries & Data Recording
• Noises Affecting Seismic Recording; Classification of Noises & Noises Examples
• Overview of Seismic Data Processing; Demultiplexing, Gain Recovery, AGC, Trace Editing & Muting, Static Corrections, Deconvolution, Filtering, NMO, Migration, etc
• Overview of Seismic Data Interpretation; 2D & 3D, Seismic-Well Tie, Structural & Stratigraphic Interpretation, AVO, Spectral Decomposition, Coherency, etc

Cost: 1950 USD

Duration: 5 Days

• Acquiring the essential basics of geophysics and seismic data processing.
• Understanding the main elements of a seismic processing report.
• Evaluating the quality of a processing sequence and critically analyze the image to be interpreted and its uncertainties
• Proper communication with processing geophysicists

1. Basics Seismic processing
   
   The seismic Theory :

• wave propagation
• reflection
• refraction
• diffraction velocities

1. Seismic recording spreads :

•  Sources
• recording systems
• common depth  point coverage.

1. Seismic Processing  Sequence.

• Re formatting .
• Geometry.
• Amplitude Recovery.
•     Statics.
• Noise Attenuation.
• De convolution.
• Normal move out correction.
• Residual Statics.
• Multiple Attenuation.
• Common depth point stack/Gathers.
•    Post / Pre Stack Time Migration.
• Post Stack  Processing ( Filtering /De convolution/Scaling).

• Geophysicists work with Processing, Acquisition, and interpretation that are actively involved in seismic processing and/or liaise with seismic processing contractors.
• Geophysicists who are involved in special studies should have a thorough understanding of conventional processing.

Cost: 1750 USD

Duration: 5 Days

1. Inflow performance and productivity index for oil wells and gas wells.
2. Outflow performance: matching inflow with outflow to optimize well productivity
3. Flow Regimes in vertical, deviated and horizontal wells.
4. Slippage velocities in vertical and deviated wells.
5. Various techniques of measuring fluid velocities of oil, water, gas using spinners, oxygen activation, phase velocity logging and gas bubble velocity
6. Measurements of three phase holdups using electric and optical sensors.
7. Spinner calibrations to obtain fluid velocities and hence production rates. Calibrations in vertical, deviated and horizontal wells.
8. Three-phase production logging in horizontal wells.
9. The physics of pulsed neutron logging (PNL): Principle of the minitron for neutron generation.
10. Capture mode in PNL logging.
11. Carbon/Oxygen (C/O) mode- development of data base charts to obtain water saturation and water hold-up.
12. Cased Hole Formation Resistivity.
13. Slim hole induction logging in plastic (non-conductive) casings.
14. Cased hole dynamic tester: obtaining fluid samples and pressure analysis from behind the casing.

Cost: 1950 USD

Duration: 5 Days

1. Basics of MWD and LWD- signal processing and tool combinations.
2. MWD Data acquisition.
3. LWD tool Physics and applications that covers the following tools: 
4. Integrated Log Data Acquisition that includes neutron spectroscopy, Sigma capture cross section, resistivities, density-photoelectric cross section, GR and borehole caliper imaging.
5. The new technology of Sourceless Neutron and density data acquisition.
6. LWD Acoustic measurements.
7. LWD Seismic measurements.
8. LWD Formation Pressure and formation mobility whilst drilling.
9. LWD Nuclear Magnetic Resonance (NMR) whilst drilling.
10. LWD Laterolog and Induction Resistivity measurements.
11. LWD Borehole imaging.
12. LWD Geosteering tool physics and applications.

Cost: 1950 USD

Duration: 5 Days

1. Inflow performance and productivity index for oil wells and gas wells.
2. Outflow performance: matching inflow with outflow to optimize well productivity
3. Tool conveyance using tractors and coiled tubing
4. Depth control in cased hole wells using GR and CCL
5. Well completions applied to vertical, deviated, horizontal, and multi-laterals
6. Pressure control system for rigless operation
7. Reservoir Fluids: fluid properties: GOR, Bubble point Pressure; three phase diagram
8. Reservoir drive mechanisms and associated production problems
9. Justifying acquiring production logs
10. Flow Regimes in vertical and deviated wells and slippage velocities
11. Defining slippage velocities and using charts to obtain slippage velocities of oil and gas.
12. Standard production logging tools
13. Various techniques of measuring fluid of oil, water, gas using spinners, oxygen activation, phase velocity logging and gas bubble velocity
14. Measurements of three phase holdups.
15. Spinner calibrations to obtain fluid velocities and hence production rates.
16. Single phase and 2-phase and 3 phase production log interpretations.

Cost: 1750 USD

Duration: 5 Days

Cost: 2250 USD

Duration: 5 Days

• Basic concepts and application
• Technologies, processes, and methods
• Essential elements of reservoir geology
• Structural features   

• Direction drilling concepts
• MWD position and drilling-related data
• MWD techniques and tools       

• LWD tools and techniques
• Formation evaluation techniques
• Practical examples     

• Influence of LWD on high angle wells
• Practical examples
• LWD images, acquisition, and application  

• Model-compare-update method
• Incorporating real-time dip analysis
• Remote boundary detection   

Cost: 1950 USD

Duration: 5 Days

• This course that covers wireline logging, MWD-LWD and their specific applications for wellbore stability. This course will be suitable for all drilling engineers, directional drillers and other geoscientists associated with drilling.

1. Reservoir Rock and Life of a well
2. Tool Conveyance, Depth Control
3. Well bore stability and filtrate diameter of invasion
4. The mud log and its applications
5. Basics of Logging
6. Log Quality Control
7. GR Spectroscopy and its application to determine clay type
8. The Spontaneous Potential and its applications to estimate water salinity and volume of shale
9. Acoustic Log: secondary porosity, rock mechanical properties  and wellbore stability
10. The density and photoelectric cross section
11. The Neutron Log, neutron spectroscopy and sigma neutron capture cross-section
12. Density-Neutron applications for lithology, shale volume and effective and total porosities
13. Density-Neutron applications for lithology, shale volume and effective and total porosities
14. Basics of Resistivity and the Archie Equation
15. The concept and applications of the Formation Factor (FF) as a variable –m emulator
16. Resistivity measurements in the invaded zone (Rxo)
17. Resistivity measurements in the uninvaded zone using Induction and Laterolog
18. The concept and applications of array resistivity measurements
19. Wireline Formation Testing
20. Measurement While Drilling (MWD) and Logging While Drilling (LWD)
21. Data acquisition of porosity, lithology, Pulsed Neutron Sigma and resistivities
22. Formation Pressure
23. Geosteering basics
24. Seismic
25. Acoustic
26. Shale Volume (Vsh, Vcl) evaluation and clay type- Dispersed or laminated shales
27. Estimating the parameters of "m" and "n" in the Archie Equation,
28. Quick look techniques to estimate the oil / water, gas/water and oil/gas contacts,
29. Salinity estimations of formation water and filtrate water,
30. Estimation of porosity, lithology and water saturations in clean and in shaly-sands

Cost: 1950 USD

Duration: 5 Days

1. Determine adequacy of PNC capture vs. C/O logging methods for saturation calculation, especially through complicated well bores and in complex formations
2. Calculate water and steam saturations from Pulsed Neutron Capture (PNC) Logs
3. Correct petrophysical calculations for the influence of shaliness
4. Distinguish gas/steam from liquids
5. Compute oil saturation directly from Carbon/Oxygen technique
6. Locate water entry and judge zonal communication
7. Judge where specialty methods, such as Log-Inject-Log to estimate remaining oil vs. residual oil saturation, pseudo-density, etc., may not work
8. Make appropriate tool choices
9. Perform interpretation QC and plan logging jobs

1. Basics and application of nuclear logging in general (briefly) and cased-hole logging in particular
2. Attributes of various modern dual-detector and emerging multi-detector cased-hole logging tools used in the industry
3. Cased-hole application of pulsed neutron capture (PNC) methods in clean and shaly formations, carbon/oxygen logging in low or variable salinity conditions in water and steam floods where PNC methods do not work, and direct neutron (PNN) methods to:

• Locate oil/water, gas/liquid, or steam/liquid contacts
• Compute water, oil and gas/steam saturation (in steam floods), and residual saturation using log-inject-log methods
• Estimate pseudo-density and porosity (special cases)
• Make informed tool and measurements choices, and
• Make operations decisions

1. Application of above in open-hole completions
2. Differences in saturation interpretation methods across vendors
3. Oxygen activation to locate water entry
4. Job planning and best practice parameters for successful monitoring

Cost: 1950 USD

Duration: 5 Days

1. Basics of NMR technology.
2. NMR Core Analysis.
3. Rock typing from NMR core data and its relationship to logs.
4. Pore geometry and what it means for the interpretation of NMR data.
5. NMR logs.
6. Job planning.
7. Log quality control.
8. Working with NMR data (various exercises throughout the course).

Cost: 1750 USD

Duration: 5 Days

1. Definitions, Tools, theory of the dipmeter and borehole images.
2. Types of the borehole images.
3.  Image Processing and quality control.
4. Interpretation techniques.
5. Petrophysical interpretation of borehole images.
6. Structural interpretation of the dipmeter and borehole images.
7. Fracture description from borehole images and dipmeter data.
8. Stratigraphic, Sedimentologic interpretation and facies creation based on borehole images and dipmeter.
9. Facies association and depositional modeling.
10. Exercises.

Cost: 1750 USD

Duration: 5 Days

1. Coring and core analysis objectives
2. Coring hardware and maximizing core recovery
3. Core-handling, wellsite procedures, and preservation methods
4. Sidewall coring and analysis
5. Organizing effective laboratory programs
6. Porosity, permeability, and fluid saturation
7. Unconventional Reservoir Analytical Protocol
8. Quality control in core analysis
9. Petrography and mineralogy
10. Special core analysis sample selection and statistical data analysis
11. Core-log correlation (includes nmr log calibration, acoustic, nuclear, and electrical properties) an introduction to rock mechanics
12. Wettability, relative permeability, capillary pressure, and reservoir fluid distribution
13. Data integration in reservoir simulation
14. Final problem: design of coring and core analysis program

Cost: 1750 USD

Duration: 5 Days

1. Petrophysical rock types.
2. Water saturation (Sw) and impact of capillary pressure and rock electrical properties.
3. Comparison of log-based Sw relationships.
4. Permeability prediction and capillary saturation workflows with example model construction.
5. Height function and Thomeer approaches.
6. Drainage and imbibition relative permeability curves and their relationship to wettability.
7. Wellbore simulation using petrophysical rock types, facies, and flow units.
8. Recovery factor simulation based on petrophysical data.
9. Application of field-study flow units.

Cost: 1750 USD

Duration: 5 Days

1. Understand and apply at a basic level the theory and operation of major petrophysical tools
2. Calibrate porosity and permeability values from core and log sources for improved saturation calculations
3. Apply basic cased-hole logging, borehole seismic, image, and LWD/MWD
4. Analyze and integrate log, core, geosciences, and engineering well data for well and field development projects
5. Select petrophysical tool combinations for specific applications
6. Assess the impact of petrophysical analyses on technical uncertainty estimates of reservoirs

1. Fundamental concepts of Petrophysics
2. Depositional systems and petrophysical rock parameters
3. Nature of porosity and permeability
4. Basic rock properties; theory and quick look techniques
5. Mud logging
6. Core analysis, acquisition, interpretation, and quality checks
7. Theory and basics of resistivity, radioactivity, acoustic tools
8. LWD/MWD versus open hole logging
9. Determination of rock types using core and logs
10. Cased hole logging
11. Petrophysical impact on economic uncertainty
12. Evolving petrophysical technologies

Cost: 1750 USD

Duration: 5 Days

This course emphasizes the role of the well as part of the Integrated Production System. It covers well completion design concepts and the technical selection criteria for key completion components. Participants will engage in group exercises on completion design and well performance. The course also provides insights from an operating company’s perspective on well completion and production management.

Course Objectives

By the end of the course, participants will be able to:

• State how Well Completion fits into E&P Activity.
• Recall and discuss hydrocarbon exploitation considerations for well productivity and completion design.
• Describe the main parameters that influence Well Performance and Productivity.
• Explain the selection and design factors of the completion string and components.
• Carry out a completion design and explain how it will be implemented in the well.

Cost: 1950 USD

Duration: 5 Days

1. The seismic Exploration Methods.
2. The Basic Principles of Seismic Exploration.
3. Basic Seismic Data Acquisition.
4. Basic Seismic Data Processing.
5. Basic Seismic Data Interpretations.

Who should attend? 
Geoscientists, engineers, team leaders, geoscience technicians, asset managers, and anyone involved in using seismic data that needs to understand and use this data as a communication vehicle.

Course Outlines
• The nature of seismic data
• What is wave propagation?
• What causes seismic reflections and how they relate to rock properties including pore filling material
• The wavelet in the seismic data and its limit of resolution
• Seismic velocities as they relate to rock properties and the imaging process
• The relationship between seismic velocities and pore pressure
• Pore pressure prediction
• Seismic data processing and seismic migration
• Prestack, poststack, time and depth imaging
• Direct hydrocarbon indicators and AVO
• Seismic inversion for rock and fluid properties
• Seismic attributes
• Time lapse reservoir monitoring (4D seismic surveys)
• Recent developments in seismic acquisition, processing, and interpretation
 

Cost: 1750 USD

Duration: 5 Days

• Introduction to Geology.
• Basic Concepts.
• Petroleum System – Elements & Processes:
• Source rocks & its types.
• Reservoir rocks
•  Seal.
•  Trapping geometries.
• Introduction to Geophysics.
• Geophysical exploration methods.
•  Seismic methods.
•  Classification of Seismic Waves.
•  Seismic data interpretation.
• Depositional systems:
• Basin formation & types.
• Siliciclastic reservoirs.
• Carbonate reservoirs.
• Lithology Interpretation using integrated well logs.
• Geology from wireline logs (Quantitative Interpretation).
• Risking & Ranking in prospect evaluation:
•  Basic concepts.
•  Evaluation Process.
•  Define play concept.
•  Assess Risk (Uncertainty).
•  Estimate reserve potential.
•  Volumetrics, risk & uncertainties.

• Geologists
• Reservoir engineers
• Operation engineers
• Geophysicists
• Petrophysicists
• LWD & MWD engineers

Cost: 1750 USD

Duration: 5 Days

1. Review and practice of Steam Injection processes.
2. Use and practice of Steam Thermal tables to calculate the injected energy in a steam injection well.
3. Steam flood Temperature and Saturation Profiles
4. Steam Injection Mechanisms
5. Cycle Steam Injection Processes
6. Criteria for evaluating Steam Injection Prospects
7. Estimated Heat Loss as function of depth
8. Steam Injection Project Planning
9. Economic of steam injection
10. Water Treatment for Steam Generation/Water Chemistry
11. Oilfield Steam Generator Water Quality Requirements
12. Steam Generation
13. Surface Steam Quality Measurement Concept and Methods
14. Thermal well Completion Practices
15. Thermal Cementing Practices

Cost: 1750 USD

Duration: 5 Days

1. Determine Sand Production causes
2. Determine the need for Sand Control in Oil and Gas Wells
3. Selection of Sand Control Method according specific field and well conditions
4. Preparation of the well for Sand Control
5. Optimization of Perforation design for Sand Control
6. Design a Perforation program to optimize Sand Control
7. FracPack and Sand Control Technology
8. Consolidation of the Formation Sand
9. Sand Control technology and state of the art in Gas Wells

• Practical Approaches to Sand Control Management
• The Nature of Sand Production
• Determining Need for Sand Control
• Selection of Type of Control

• Management phases in Sand Control
• Mechanisms of Sand Production in Oil and Gas Wells
• Stability Envelop for Sand Control
• Prevention phase and decision based on technical information

• Effects of Viscosity and water cut in Sand Control
• General Methods to control sand production
• Mechanical Systems to control production of sand
• Successful design conditions and factors
• Application  Saucier’s  theory in the design of sand control systems
• Use the results from the Sieve analysis to select Gravel, Slotted Liners and Screens

• Charge Performance
• Perforation Design Factors
• Perforations for Gravel Packing
• Perforation Clean out Methods

• Laboratory test and Equipment
• Slot and Gravel Design
• Selection of Slotted Liners, Screens and PrePacks
• Saucier's Bridging Theory
• Design Examples and Calculations

• FracPack History
• Basics of Job Designs
• Field History Cases

• Resins for Consolidation
• Methods for Resin Placement
• Resin Coated Gravel
• Thermosetting Gravel Packs

• Prediction of Sand Production in Gas Wells
• Effect of Water Production on Sand Production in Gas Wells

Cost: 1950 USD

Duration: 5 Days

1. Geophysical and Seismic Interpretation Tasks
2. 3-D  Conventional Seismic to Interpretation…
3. Image Analysis
4. Modern Interpretation
5. Seismic Geomorphology
6. Seismic Attributes
7. Fractured RC
8. Inversion
9. DHI
10. Depth Conversion

• Learning objectives are at knowledge and application levels.

• The participants will gain a solid understanding of the applications and role of the seismic interpreter in studies related with pre- and post-stack seismic attributes

• seismic geomorphology and rock physics measurements, and multidisciplinary integrated studies.

• Geophysicists with good background about seismic interpretation.
• Geologists who are working closely to Geophysicists.
• Geo modelers who are working in integrated modeling projects.
• managers who are working so close with seismic data.

Cost: 1750 USD

Duration: 5 Days

• Define Geology as a science & all included sciences as structural geology, sedimentology …etc.
• Know the origin of earth.
• Describe the structure of the earth, the composition of each layer & the relations between the layers.
• Determine the elements that form earth's crust.
• Recognize the types of different rocks & the cycle which relate each other.
• Recognize the main rock forming minerals.
• Have a good knowledge about the geologic time record, paleogeography & paleontology.
• Define the forces affecting the earth’s crust & the major tectonic events occurred in earth.
• Recognize the main structural elements of the earth’s crust in both regional scale, macro scale & micro scale.
• Understand each representative method of describing earth's structures & features like maps, cross sections & diagrams.
• Describe the elements of the petroleum system.

1. Definition of geology & it's related sciences.
2. Origin of the universe, solar system & earth .
3. Structure & composition of earth.
4. Types of rocks & rock cycle.
5. Earths age, types & methods of age dating.
6. Geologic time scale.
7. Introduction to paleontology.

• Earths crustal motions & tectonic theories.
• Earths paleogeography.
• Earths structural elements, folds, faults & fractures.

1. Recognition of structural elements in field.
2. Recognition of structural elements on maps & satellite images.
3. Representation of structural elements

• Structural contour maps.
• Structural cross sections.
• Stereographic projections.
• Rose diagrams.

1. Introduction to rock forming minerals.
2. Introduction to sedimentary petrology.

• Clastic rocks.
• Nonclastic rocks.
• Rocks composition, texture & maturity.

1. Agents affects sedimentation weathering, erosion transportation & deposition .
2. Post depositional processes " Diagenesis ".
3. Introduction to main sedimentary environments.
4. Introduction to stratigraphy.
5. Types & principles of earth's stratigraphy.

• Biostratigraphy.
• Chronostratigraphy.
• Lithostratigraphy.
• Sequence stratigraphy.

1. Representation of stratigraphic elements.

• Stratigraphic column.
• Stratigraphic well logs.
• Stratigraphic cross sections.
• Stratigraphic stratigraphic well correlation.
• Fence & panel diagrams.

1. Origin of petroleum.
2. Introduction to petroleum system elements.

• Source rocks.
• Reservoir rocks.
• Seal rocks.
• Petroleum traps.
• Time factor.

1. Introduction to reservoir evaluation & mapping.
2. Introduction to remote sensing.

1. Reservoir engineers
2. Operation engineers
3. Geophysicists
4. Petrophysicists
5. LWD & MWD engineers
6. Mud engineers

Cost: 1750 USD

Duration: 5 Days

• Examples applied to (Clastics & carbonate Reservoirs).
• Examples applied to (Oil & Gas Reservoirs).

• Database setup, data loading and LQC
• Data presentation
• Depth shift between different well data (WL, LWD,…)
• Curve Splicing (merge) between different log runs
• Data Editor

• Lithology identification using different cross plots
• Reservoir zonation
• Precomputations (Create temperature curve)
• Flags (quality & mineral flags)
• Pickett plot (Rw & cementation exponent determination)

• Shale volume calculations
• Porosity calculation methods
• Hydrocarbon corrections
• Saturation calculation methods
• Cutoff and Summation

• Quanti Elan-initialization
• Construction of formation evaluation models
• Cutoff and Summation

• Initialization
• Combining multi-models
• Quanti-Elan Post Processing

• Core-Log integration
• Multi-wells data analysis
• Reservoir Rock Typing (RRT)
• FZI Calculations
• MLP for Rock Types prediction using neural network in uncored wells (qualitative variables)

• Launch from the menu
• Data input selection
• Learning Phase & data selection
• Result visualization and quality control step
• Apply to others Wells (uncored wells) (quantitative variables)

• LRP (Low Resistivity Pay) workflow
• Sand Count work flow

•  Data Import from Excel
• Data Quality control
• Core Data Processing
• Creating a Model
• Quality Control Model
• Saving and Exporting Model

• Compute Water Saturation
• Compute Permeability
•  Free Level Computation (FWL)
• Solve for Free Level
• Solve the Model
• Exporting Model and Saving Workflow

Cost: 5500 USD

Duration: 10 Days

• Examples applied to (Clastics & Non-clastics reservoirs (Tight)).
• Examples applied to (Oil & Gas reservoirs).

• Database setup, Quality Control data and Loading data (from DLIS or LAS files).
• Data presentation.
• Depth Match between different well data (WL, LWD,…).
• Curve Splicing (merge) between different log runs.
• Lithology identification from wireline logs & using different cross plots.
• Different methods for Reservoir zonation.
• Create temperature curve & temperature gradient.
• Determination of fundamental petrophysical parameters (Rw, m,n,..)

• Shale volume calculations.
• Determination of clay minerals using different cross plots.
• Porosity models & calculation methods.
• Saturation models & calculation methods.
• Cut-off and Summation.
• Cross plots for Lithology, porosity and oil/water/gas saturation.

• Initialization.
• Construction of Formation Evaluation models.

• Combining formation evaluation model.
• Post Processing.

• Why Reservoir Modeling? Purposes and workflow
• Software (tool) basics
• Data Preparations, Loading, Import
• Structure and Stratigraphic Model
• Practical sessions (Surface – Based Modeling), (Volume Based Modeling – VBM)
• Model Concept – GDE’s maps and analogous sketches
• Time Depth Conversion (TDR- Time depth Relations), Velocity models
• Geo-statistics  Principals
• Upscale Well Logs
• Facies Distribution
• Petrophysical Populations
• Data Analysis
• Case Studies- Demos
• QC Model
• Volume Calculations

• Objectives of construct 3D earth Model- Presentations
• Practical Session-Software
• Reservoir Modeling workflow-
• Data Preparations, Import, Displaying

• Fundamentals of Reservoir characterization’s (Facies barriers, & Hydraulic donations) - Presentations
• Case study- Static Modeling – FDP’s
• 1st session – Software - Practices
• Make Edit Surfaces
• Surface-Based Modeling
• Structure 3D Modeling in E & P Workflow

• Software- Demo Practical 2nd Session
• 3D empty structural modeling workflow- Structural Framework process, Segmentation/compartmentalization’s, Domain Conversion, Make zones, & Layering.
• Volume –Based modeling (VBM)
• Structural  and Stratigraphic Framework – Model Elements
• Deterministic and Probabilities techniques
• Depth Conversion – Velocity model

• Geostatistics – (What, Why, Keys, & applications)
• Software- Demo Practical 3rd Sessions
• Upscale Well Log- Continuous & Discrete logs
• Data Analysis
• Variance, Correlation Coefficients, Variogram and Anisotropy
• Algorithms – Methods
• What is the Property Modeling?
• Facies Modeling; (Object, Pixel-based, SIS, TGS,…etc) methods
• Geometrical modeling, Seismic Resampling, …etc
• QC Model

• Continue – Property distribution
• Practical Session
•  Petrophysical Modeling; (Kriging, Gaussian, Simulations)
• Make Contacts
• Volumetric calculations.

Cost: 5500 USD

Duration: 9 Days

• Horizontal Flow Regimes
• Vertical Flow Regimes
• Erosional Velocity
• Calculating Pressure Drop

Cost: 1750 USD

Duration: 4 Days

Cost: 1950 USD

Duration: 5 Days

Cost: 1950 USD

Duration: 5 Days

Cost: 2250 USD

Duration: 5 Days

Cost: 2250 USD

Duration: 5 Days

• Compare drilling operations both onshore and offshore and understand the differences between the various types of rigs and platforms.
• Distinguish the various components of the drill string: hoisting and rotating systems and pipe handling equipment; bit types and their design and application; the mud circulation process and system; the variety of drilling fluids and well hydraulics; casing and cementing procedures; directional drilling processes and techniques; borehole surveying.
• Appraise mudlogging services, including the collection and analysis of ditch cuttings and lag time estimation; depth and bit parameter measurements; the collection, analysis, and integration of gas readings; and the wider role of mudlogging in safety monitoring and drilling engineering support.
• Analyze how ditch cuttings are sampled, described, reported, logged, and evaluated for lithological evaluation and hydrocarbon potential.
• Compare conventional coring and sidewall coring processes, procedures and evaluation techniques.
• Distinguish the acquisition, processing, and basic interpretation of wireline from LWD logs and their integration with other wellsite-derived geological data.

• Well site geologist job description.
• Duties and responsibilities for well site geologist
• Safety on rig site
• Office preparation
• Getting mobilizing
• Mud logging unit supervision
• Cuttings: sampling, cleaning, analysis, description, calcimetry, lag time, XRD, fluorescence.
• Quality and representativeness of cuttings

• Quick review of mechanical parameters (WOB, RPM, and ROP) and hydraulic parameters (SPP, MFR, MWt in & out, etc.) monitored during drilling.
• Detection and evaluation of gas shows while drilling, chromatography, and type of dissolved gases in the mud.
• Importance of gas control on quality of measurements. Gas while drilling.
• Role of well site geologist: analysis and decision.
• Depth control: depth, deviation surveys (MD, TVD, TVDSS), and stratigraphic column.
• Gathering geological and drilling information

• Geological log: header and track presentation; main software programs.
• Drilling parameters for a geological log
• Calcimetry, gas, gain, and losses
• Composite log: interpretation of geological observations and descriptions for the lithology
• Rig types
• Drilling, casing, and cementing.
• Core and casing points

• MDW, LWD, and Geosteering
• Wireline logging operations
• Preparation for wireline logging
• Log quality control
• Overview of Shally sand interpretation
• Overview of log interpretation in thin sand/shal sequences
• Overview of log applications in Shall-oil/gas formations

• Integration of other data: well tests results and logging information.
• Supervision and quality control of logging operations.
• Coring operations: core recovery, cleaning, splicing, description, fracture identification, sampling, photos.
• Final report
• Case studies

Cost: 1750 USD

Duration: 5 Days

• Work breakdown structure
• Project cost estimating
• Resource allocation
• Cost management
• Gantt charts
• Engineering economics
• Mathematical project scheduling models
• Leadership

Who Should Take
The PMP® certification is an essential professional requirement for senior project manager roles across all industries. This course is best suited for: Project Managers, Associate/Assistant Project Managers, Team Leads/Team Managers, Project Executives/Project Engineers, Software Developers, and Any professional aspiring to be a Project Manager.

Career Opportunities
Project Management Professionals (PMP) are in high demand across industries due to their critical role in driving successful projects. Global trends indicate a 33% growth in job opportunities for PMP-certified professionals, with millions of project-oriented roles expected by 2027. In Dubai, PMP-certified individuals earn a 22% higher salary than their non-certified peers, with an average annual package of AED 312,000. This certification not only ensures fast career advancement but also opens doors to diverse opportunities across various sectors. The growing demand makes PMP certification a valuable asset for career growth and financial rewards.

What’s Included

• Instructor training
• Unlimited Mock Exams (PMI real questions based)
• Recorded Training Sessions 
• Comprehensive Training Materials
• Complete books pack (PMBOK 6TH Edition, 7th Edition, and Agile Practice Guide)
• 100% Success Guarantee

Training Options

• Standard Advance Package (AED 1299)
• Premium Advance Package (AED 1999)
• Corporate Training (Get Quote)

Cost: 1299 AED

Discount: 15% Off for Laimoon Users!

Duration: 2 To 5 Weeks

Cost: 4000 AED

Duration: 3 Days

• Effective Negotiations and Negotiators:Personality Types and Negotiation:
• Types of Negotiation: 
• Preparing for Negotiation:
• Opening the Negotiation:

Day 2:

• Exchanging Information and Bargaining:
• Talking About Conditions and Compromising:
• Negotiation Strategies:

Cost: 5500 AED

Duration: 2 Days

• Understanding Innovation
  • Definition and types of innovation
  • Importance of innovation in business
  • Case studies of successful innovations
• Understanding Change
  • Definition and types of change
  • The change process and its phases
  • Organizational change models (, Kotter’s 8-Step Change Model)

Day 2: Drivers and Barriers to Innovation and Change

• Drivers of Innovation
  • Market forces, technology, and consumer demands
  • Role of leadership and culture in driving innovation
• Barriers to Change
  • Identifying resistance to change
  • Overcoming barriers and fostering a supportive environment
  • Change management strategies

Day 3: Implementing and Sustaining Innovation and Change

• Tools and Techniques for Managing Change
  • Change management frameworks (, ADKAR, Lewin’s Change Management Model)
  • Communication strategies for change initiatives
• Fostering a Culture of Innovation
• • Techniques for encouraging creativity and collaboration
  • Measuring and evaluating the success of innovation and change initiatives
• Group Discussion and Case Study Analysis
  • Application of learned concepts to real-world scenarios
  • Group presentations on case study findings

Cost: 5500 AED

Duration: 1 To 3 Days

• Responsibilities and Challenges of a New Manager
• Key Qualities for Effective Management
• Leadership Fundamentals
• Situational Leadership and Team Dynamics
• Communication Skills for New Managers
• Time and Stress Management
• Problem-Solving and Decision-Making
• Motivation and Delegation
• Leading Change and Managing Resistance
• Performance Management and Continuous Improvement

Cost: 8000 AED

Duration: 3 To 5 Days

Cost: 8000 AED

Duration: 5 Days

• Introduction to Strategic Planning
• Operational Planning Overview
• Strategy Formulation
• Operational Plan Development
• Monitoring and Evaluation
• Risk Management in Planning
• Continuous Improvement

Cost: 6500 AED

Duration: 2 To 3 Days

• Results-Based Leadership: A Manager’s Challenge
• Flying in V Formation 
• Motivating and Engaging Employees for Exceptional Results
• Managing Individual Results Through Effective Performance Management
• The Inspirational Leader 
• Emotional Intelligence (EI) Competencies and Leadership Styles
• The Results-Based Leader as Talent Builder

Cost: 4500 AED

Duration: 2 Days

• Organizational Structures and Strategic Decision-Making
• Business Processes and Concepts
• Decision-Making Tools for Prioritizing Tasks
• Planning, Scheduling, and Tracking Workflows
• Tracking Progress and Forecasting

Cost: 6500 AED

Discount: 20%% Off for Laimoon Users!

Duration: 5 Days

Cost: 6500 AED

Discount: 20%% Off for Laimoon Users!

Duration: 5 Days

Discount: 20%% Off for Laimoon Users!

Duration: 5 Days

• Who Do You Think You Are?
• Enriching Your Communication Skills
• The Skills of the Coordinator
• The Modern Leader
• Communicating, Coordinating, and Leading

Cost: 6500 AED

Discount: 20%% Off for Laimoon Users!

Duration: 5 Days

Cost: 4500 AED

Cost: 6000 AED

Discount: 20%% Off for Laimoon Users!

• Session 1: Introduction to Empowerment
  • Definition and key concepts
  • The importance of empowerment in organizations
  • Historical context and evolution of empowerment theories
• Session 2: Barriers to Empowerment
  • Common misconceptions about empowerment
  • Psychological barriers (fear of failure, lack of confidence)
  • Organizational barriers (hierarchical structures, lack of resources)
• Session 3: Benefits of Empowerment
  • Enhanced employee engagement and morale
  • Improved decision-making and problem-solving
  • Positive impact on organizational performance

• Session 4: Empowerment Techniques
  • Communication strategies to promote empowerment
  • Delegation of authority and responsibility
  • Encouraging innovation and creativity in teams
• Session 5: Building an Empowered Culture
  • Developing trust and transparency
  • Fostering collaboration and teamwork
  •  

• Recognition and reward systems for empowered employees

• Session 6: Action Planning and Implementation
  • Creating a personalized empowerment action plan
  • Setting measurable goals and outcomes
  • Evaluating the success of empowerment initiatives

Cost: 3000 AED

1. Solution Analysis
   • The role of logic versus intuition in evaluating potential solutions.
   • Considering multiple perspectives when analyzing solutions.
   • Narrowing down solutions using rating charts, risk analysis, and other tools.
   • Addressing challenges in individual and team-based decision-making.
2. Making a Decision
   • Different decision-making styles and sensitivities.
   • Navigating ambiguity and overcoming paralysis by analysis.
   • Using the Decision Matrix and other tools to evaluate solutions.
   • Understanding the Sunk Cost Paradox and the golden rules of decision-making.
3. Implementing the Solution
   • Developing a plan for implementation and delegating tasks.
   • Tracking and evaluating the outcomes of decisions.
   • Creating contingency plans and conducting after-action reviews.
   • Conducting risk assessments as part of decision-making processes.

Cost: 4500 AED

1. Problem Solving in Planning and Monitoring:
   • Addressing challenges and deviations from the plan
   • Root cause analysis and resolution strategies
   • Continuous improvement and feedback loops
2. Using Technology for Effective Planning and Monitoring:
   • Overview of planning and monitoring software (, MS Project, Trello)
   • Leveraging data for performance tracking and decision-making
3. Communication and Reporting:
   • Communicating plans and expectations to the team
   • Reporting progress to stakeholders
   • Conflict resolution and negotiation skills in planning

Cost: 4000 AED

1. Introduction to Creative Leadership
   • Definition and importance of creative leadership in the modern workplace
   • Characteristics of a creative leader
2. Self-Assessment
   • Identifying personal leadership styles
   • Recognizing strengths and areas for development
3. Building a Creative Culture
   • Strategies to create an environment that fosters creativity
   • Encouraging risk-taking and innovation among team members
4. Case Studies
   • Analysis of successful creative leaders and organizations
   • Lessons learned from failures and successes
5. Practical Exercise: Vision Crafting
   • Developing a personal vision statement that aligns with creative leadership

1. Unlocking Potential in Teams
   • Identifying and leveraging team strengths
   • Techniques for empowering team members
2. Motivation and Engagement Strategies
   • Understanding intrinsic vs. extrinsic motivation
   • Tools for energizing teams and enhancing engagement
3. Facilitation and Communication Skills
   • Effective communication techniques for leaders
   • Facilitating creative brainstorming sessions
4. Action Planning
   • Creating a leadership development plan
   • Setting SMART goals for personal and team growth
5. Wrap-Up and Feedback
   • Group reflection on learning outcomes
   • Actionable steps for implementation in the workplace

Cost: 4500 AED

1. Structural Framework for Corporate Governance
2. Building Checks and Allocating Responsibility
3. Boardroom Practices and Independence
4. Corporate Governance and Employee Compensation
5. Supporting a High-Performing Board
6. Managing Performance, Risks, and Assurances
7. Making Accountability Real
8. Practicing Good Governance

Cost: 6000 AED

Discount: 20%% Off for Laimoon Users!

1. • Change Agent’
   • Psychological Stages of Change: Shock, Resistance, Rejection, Resolution, Acceptance, Integration, ‘Buy-In’
   • Developing Anticipatory Change
   • Roles Involved in Change
   • ADKAR Model and Application
   • Identifying Potential Problems
   • Action Planning
   • Overcoming Resistance to Change
     • Understanding Resistance
     • Strategies to Manage and Overcome Resistance
   • Change and You
     • The ‘Nature of Change’ Pattern
     • Effective Communication of Change
     • Applying Change Communication Strategies to Your Team
   • The Change Manager’s Checklist
     • The Eight-Step Process of Implementing Successful Change
     • Skills Needed to Be a Successful ‘Change Agent’

Cost: 5500 AED

Discount: 15%% Off for Laimoon Users!

• Definition and importance of change management
• Types and levels of change (organizational, departmental, individual)
• The role of leadership in change management

• Lewin's Change Management Model
• ADKAR Model (Awareness, Desire, Knowledge, Ability, Reinforcement)
• Comparing various frameworks

• Defining strategic thinking and its significance in change processes
• Linking change management to strategic organizational goals
• Long-term vs. short-term strategic change initiatives
• Evaluating organizational readiness for change

• Understanding the reasons for resistance to change
• Strategies for overcoming resistance
• Stakeholder engagement and communication planning
• Building trust and transparency during change

• The role of leaders in driving and sustaining change
• Change champions and their impact
• Emotional intelligence in leading change
• Leading through uncertainty

• Conducting a change impact assessment
• Strategic planning for change initiatives
• Creating a communication plan
• Monitoring and controlling change processes
• Using project management tools for change implementation

• Measuring the success of change initiatives
• Key performance indicators for change
• Embedding a culture of continuous improvement
• Learning from failed and successful change initiatives

Cost: 4500 AED

Duration: 1 To 3 Days

• Setting ambitious and achievable targets
• Learning from case studies and engaging in practical activities
• Identifying strategic initiatives that allocate resources for maximum impact
• Planning for the implementation of the Balanced Scorecard
• Cascading the Balanced Scorecard throughout the organization
• Creating an executive dashboard to monitor progress toward strategic goals

Cost: 5900 AED

Duration: 2 Days

Cost: 4500 AED

Duration: 1 Day

• Understanding Adaptive Leadership
• Fundamentals of Leadership
• Transformational Leadership
• Situational Leadership
   

• Enhancing Leadership Skills
• Emotional Intelligence and Leadership
• In-depth Leadership and Management Training
• Leadership Communication Skills
   

• Leadership Training for Managers
• Effective Team Leadership
• Conflict Resolution in Leadership
• Navigating Leadership Challenges

• Leadership Development Training
• Practicing Adaptive Leadership
• Leadership in a Changing Environment
• Building Resilience in Leadership

Cost: 5900 AED

Discount: 20%% Off for Laimoon Users!

Duration: 4 Days

Discount: 20%% Off for Laimoon Users!

Duration: 5 Days

Cost: 5900 AED

Discount: 20%% Off for Laimoon Users!

Duration: 5 Days

• Methodologies for assessing supplier effectiveness
• Key Performance Indicators (KPIs) and metrics for evaluation
• Tools for data collection and analysis

Evaluating Supplier Alignment

• Techniques for conducting thorough supplier capability analyses
• Frameworks for ensuring strategic alignment with organizational objectives
• Evaluating supplier compliance and performance reviews

Practicing Integration Techniques

• Strategies for integrating suppliers into the procurement process
• Collaborative frameworks to support strategic objectives
• Best practices for onboarding and maintaining supplier relationships

 
 
Enhancing Procurement Efficiency

• Identifying inefficiencies in procurement workflows
• Techniques for streamlining procurement processes
• Implementing technology solutions for procurement optimization

 
Managing Strategic Relationships

• Understanding relationship dynamics with key suppliers
• Negotiation tactics for establishing long-term partnerships
• Developing frameworks for effective supplier communication

Improving Relationship Outcomes

• Core skills for enhancing supplier relationship management
• Conflict resolution strategies and communication improvements
• Evaluating and measuring relationship success

Collaborative Working Methods

• Joint working methods for strategic relationships
• Frameworks for collaborative initiatives aligned with organizational goals
• Case studies on successful collaboration practices

Cost: 4500 AED

Duration: Upto 3 Days

• Understanding the Role of a Trainer
• Importance of Effective Training in Organizational Success
• Characteristics of an Effective Trainer
• Adult Learning Principles
• Learning Styles and Preferences

Module 2: Training Needs Analysis (TNA)

• Identifying Training Needs
• Understanding Organizational Goals and Employee Performance Gaps
• Designing Training Objectives Based on Needs Analysis
• Prioritizing Training Topics

Module 3: Instructional Design and Training Methodologies

• Creating a Training Plan
• Designing Engaging and Interactive Training Materials
• Understanding Different Training Formats (Classroom, E-Learning, Blended Learning)
• Adapting Content for Various Audiences
• Developing Learning Activities, Simulations, and Case Studies

Module 4: Presentation and Facilitation Skills

• Overcoming Stage Fright and Improving Confidence
• Effective Communication and Public Speaking Techniques
• Building Rapport with Participants
• Questioning Techniques and Handling Learner Questions
• Creating a Positive Learning Environment

Module 5: Training Delivery Techniques

• Best Practices in Training Delivery
• Using Audio-Visual Aids Effectively
• Engaging Learners with Group Activities, Role Plays, and Discussions
• Managing Challenging Learners and Classroom Dynamics
• Time Management during Training Sessions

Module 6: Practical Session: Conducting Training

• Practice Delivering Training to Peers
• Receiving Constructive Feedback
• Fine-Tuning Delivery and Content Based on Feedback
• Peer and Instructor Evaluation

Module 7: Advanced Training Techniques

• Coaching and Mentoring within Training Sessions
• Using Storytelling and Real-World Examples to Enhance Learning
• Gamification and Interactive Learning Tools
• Incorporating Technology into Training (LMS, Virtual Classrooms)
• Addressing Multigenerational Learners and Diversity in the Training Room

Module 8: Certification and Wrap-Up

• Final Assessment of Skills Acquired
• Preparing a Personal Development Plan as a Trainer
• TOT Certification Process and Next Steps in the Training Journey

Cost: 3500 AED

Duration: 3 Days

• Domain A Gathering and Interpreting Information: 40% of Exam Part I
  • Knowledge of sources of historical information and historical financial data about an organization and its industry.
  • Ability to understand corporate structure and functions (, hierarchy, corporate groups, the value of the group to the organization, etc.)
  • Knowledge of sources of information about a company's business environment, including sources of tax policies, economic indicators, business models, financial ratios, and industry metrics.
  • Ability to read and interpret corporate annual reports.
  • Knowledge of basic macro-economic concepts used in financial planning (, consumer price index, gross domestic product, exchange rates, interest rates, inflation rates, economic indicators, etc.).
  • Knowledge of risk factors and risk management concepts (, value at risk, hedging, insurance, interest rate risk, diversification, etc.).
  • Knowledge of strategic planning concepts and frameworks (, SWOT analysis, Porter's five forces model, growth share matrix, etc.).
  • Ability to determine information needs of and gather information from internal/external stakeholders and business partners (, operations, sales, and marketing departments; senior management; customers; etc.).

• Domain B Understanding Financial Concepts and Communicating/ Coordinating Work with Other Professionals: 60% of Exam Part I
  • Knowledge of finance principles and processes (, financial management concepts, corporate finance activities, etc.).
  • Knowledge of general financial concepts and common financial formulas (, time value, opportunity costs, debt structures and covenants, earnings per share, cost of capital, etc.).
  • Knowledge of financial accounting concepts, principles, and practices
  • Knowledge of basic micro-economics (, marginal costs, pricing, price elasticity of supply and demand, etc.).
  • Knowledge of managerial accounting/reporting and cost accounting concepts.
  • Knowledge of types of budgets/forecasts (, zero-based budgets, annual budgets, rolling forecasts, etc.) and their application.
  • Knowledge of the financial close process, including the resulting financial reporting activities, and the role of the FPAC function in the close/ reporting process.

• Domain A  Analyzing Information: 35% of Exam Part II
  • Ability to determine the applicability/acceptability of tools, processes, models, etc.
  • Ability to determine the applicability/acceptability of tools, processes, models, etc.
  • Ability to develop assumptions, draw conclusions, assess the reasonableness of assumptions / conclusions, and test conclusions against various scenarios.
  • Ability to perform a financial ratio analysis.
  • Ability to perform variance analysis and competitive analysis.
  • Ability to determine and assess the seasonality of an industry or business.

• Domain B Building Financial Projections: 35% of Exam Part II
  • Ability to create financial statement projections (, income statement, cash flow statement, balance sheet, etc.).
  • Ability to create a capital expenditure/investment analysis (, discounted cash flow analysis, return on investment projections, net present value projections, etc.).
  • Ability to create sales volume/revenue projections.
  • Ability to create "what-if" scenarios.
  • Ability to perform a sensitivity analysis.
  • Ability to perform a risk analysis Knowledge.

• Domain C Using Technology/Software: 30% of Exam Part II
  • Ability to use basic spreadsheet functions
  • Ability to use advanced spreadsheet functions (, financial functions, pivot tables, value lookups, macros, integration with other common software, etc.).
  • Ability to perform common statistical calculations (, standard deviation, expected value, correlation, regression, means, modes, etc.) using a spreadsheet.
  • Ability to document and maintain models (, understand documentation concepts, document assumptions, create supporting information and protocols, document functionality and structure, use software/data version control concepts and techniques, etc.).

Cost: 6300 USD

Duration: 90 Hours

Duration: Upto 90 Hours

• Master effective communication techniques to create impactful relationships.
• Learn how to adapt your communication style to diverse situations.
• Develop self-confidence and authenticity in professional interactions.
• Enhance teamwork and collaboration within your organization.

• A recent GMAC survey revealed that 69% of recruiters consider communication skills the most critical competency in candidates.
• Soft skills, including effective communication, rank third among the world’s highest-paying skills, making this training a career asset.

• The Characteristics of an Effective Communicator
• Importance of Communication in the 21st Century
• Communication Self-Assessment
• Basics of Communication
• Elements of Effective Communication
• Summary

• An Introduction | Components of Communication
• Verbal Communication
• Importance of the Tone
• Non – Verbal Communication
• Application and Practice
• Assessment and Personal Constructive Feedback

• What You Say Matters
• Effect and Impact of Power Words
• Positive Communication
• Words for Success
• Words to Avoid
• Practice Activities & Constructive Feedback

• Introduction | The ‘How’ of Effective Communication
• Pronunciation and Syllable Stress
• Common Grammatical Errors
• Construct Effective Sentences
• Word Stress for Vocal Impact
• Role-plays and Constructive Feedback

• Introduction | Body Language
• Elements of Non-Verbal Communication
• Do’s and Don’t
• Interpretation of Various Body Signals
• Recommended Postures for Workplace Communication
• Summary and Practice

• Introduction | Listening
• The Impact of Listening on Communication
• The 3 Levels of Listening
• Listening with Empathy
• How to Display Effective Listening
• Practice Activities & Constructive Feedback

• Introduction | Questioning Skills
• Use of Effective Probing In Communication
• What is Acknowledgement?
• Benefits of a Sincere Acknowledgements
• The Conversation Cycle
• Rapport Building
• Summary & Assignment

• Types of Communication
• Introduction to Assertiveness
• The Art of Assertive Communication
• Applying Communication Components Effectively
• Cross-cultural Communication
• Summary & Personal Constructive Feedback
• Personal Development Plan

• Build strong verbal and non-verbal communication techniques.
• Learn to communicate effectively under challenging circumstances.
• Strengthen workplace relationships through clear and impactful communication.
• Increase their employability across industries where communication is a key requirement.

• The course is designed based on real-world communication challenges.
• Hands-on assignments and case studies for practical learning.
• Guided group sessions to enhance the learning experience.
• Customized career guidance to ensure candidates excel in professional roles.

Cost: 4499 AED

Discount: 50% Off for Laimoon Users!

Duration: 24 Hours

• Analyze complex business challenges and develop strategic solutions.
• Demonstrate advanced knowledge of business analysis frameworks and practices.
• Gain a competitive advantage in a rapidly evolving industry.

• Gain 35 hours of comprehensive training aligned with industry best practices.
• Develop the ability to analyze, elicit, and manage requirements effectively.
• Achieve a guaranteed passing score of at least 70%.
• Enhance career opportunities with higher salaries and access to senior roles in business analysis.

• Plan Business Analysis Approach
• Plan Stakeholder Engagement
• Plan Business Analysis Governance
• Plan Business Analysis Information Management
• Identify Business Analysis Performance Improvements

• Prepare for Elicitation
• Conduct Elicitation
• Confirm Elicitation Results
• Communicate Business Analysis Information
• Manage Stakeholder Collaboration

• Trace Requirements
• Maintain Requirements
• Prioritize Requirements
• Assess Requirements Changes
• Approve Requirements

• Analyze Current State
• Define Future State
• Assess Risks
• Define Change Strategy

• Specify and Model Requirements
• Verify Requirements
• Validate requirements
• Define requirements Architecture
• Define Design Options
• Analyze Potential Value and Recommend a Solution

• Measure Solution Performance
• Analyze Performance measures
• Assess Solution Limitations
• Assess Enterprise Limitations
• Recommend Actions to Increase Value

• Demonstrate knowledge and skills required to excel in business analysis
• Master the principles and practices of business analysis
• Manage and communicate business requirements effectively
• Achieve organizational goals by developing core competencies
• Analyze enterprise data

• Deliver IIBA-accredited training tailored to professional needs.
• Offer customizable learning options and flexible payment plans.
• Provide access to expert trainers with real-world experience in business analysis.
• Guarantee a comprehensive learning experience with practical insights to ace the CBAP exam.

Cost: 4000 AED

Discount: 55% Off for Laimoon Users!

Duration: 35 Hours

• Understand the applicability and functionality of UCP 600
• Define the terms and parties involved, as defined for the purpose of UCP 600
• Interpret various terms as per UCP 600
• Identify the roles and responsibilities of various parties to Letter of Credit

• The amendments relating to the letter of credit
• The methodology used in teletransmission and pre-advised credits and amendments
• Checking of documents and the discrepancies related to a particular document
• The circumstances in which the letter of credit are honored

• Original documents and copies
• Commercial invoice
• A transport document covering at least two different modes of transport
• Bill of Lading
• Non-negotiable sea waybill
• Air transport document
• Courier receipt, Post receipt, or Certificate of Posting
• “On Deck,” “Shippers Load and Count,” “Said by Shipper to Contain, ” and Charges additional to freight

• Marine insurance
• Common discrepancies related to insurance documents
• Insurance document and coverage
• The discrepancies of other related documents
• Steps to avoid discrepancies
• Discrepant Documents, Waiver, and Notice

• Marine insurance
• Common discrepancies related to insurance documents
• Insurance document and coverage
• The discrepancies of other related documents
• Steps to avoid discrepancies
• Discrepant Documents, Waiver, and Notice

• Understand the international trade financing instruments
• Identify the significance of international trade financing and documentary credit
• Exhibit the applicability and functionality of several articles from UCP 600
• Describe the process of documenting the functioning of letter of credit
• Receive or send international payments in the course of doing business

• Our Letter of Credit course in Dubai is designed based on real-world scenarios, formulating and evaluating practical requirements
• Our Letter of Credit training courses in Dubai strive to provide a reality check and insight into the requirements of a challenging role and how to fulfill it
• Our Letter of Credit course also provides live interactive sessions and hands-on experience through assignments associated with the actual work environment
• To enhance the learning experience of our students we provide organized group sessions and integrated training modules
• Our discrete approach to career guidance enables our students to get successfully placed in renowned organizations

Cost: 2500 AED

Discount: 50% Off for Laimoon Users!

Duration: 40 Hours

• Introduction to Ethical Hacking
• Footprinting and Reconnaissance
• Social Engineering
• Denial-of-Service
• Session Hijacking
• Evading IDS, Firewalls, and Honeypots
• Hacking Web Servers
• Hacking Web Applications
• SQL Injection
• Scanning Networks
• Enumeration
• Vulnerability Analysis
• System Hacking
• Malware Threats
• Sniffing
• Hacking Wireless Networks
• Hacking Mobile Platforms
• IoT and OT Hacking
• Cloud Computing
• Cryptography

• Become familiar with concepts of ethical hacking, information security, and security controls
• Scan networks, hosts, and ports with various scanning tools
• List enumeration techniques such as enumerating NFS shares, and querying DNS caches, and describe the countermeasures
• Identify firewalls and intrusion detection systems, their functions, and strategies for protecting against intrusion
• Learn offensive techniques for obtaining, escalating, and maintaining access to the victim while covering the tracks

• Our Certified Ethical Hacker course is designed based on real-world scenarios, formulating and evaluating practical requirements
• Our CEH courses in Dubai strive to provide a reality check and insight into the requirements of a challenging role and how to fulfill it
• Certified Ethical Hacker course provides live interactive sessions and hands-on experience through assignments associated with the actual work environment
• To enhance the learning experience of our students we provide organized group sessions and integrated training modules in our CEH training Dubai
• Our discrete approach to career guidance enables our students to get successfully placed in a renowned organization

Cost: 12000 AED

Discount: 50% Off for Laimoon Users!

Duration: 40 Hours

Cost: 1600 USD

Duration: Upto 3 Months

• Domain 1 - IT Risk Identification (27% of exam)
• Domain 2 - IT Risk Assessment (28% of exam)
• Domain 3 - Risk Response and Mitigation (23% of exam)
• Domain 4 - Risk and Control Monitoring and Reporting (22% of exam)

• This certification is globally recognized.
• Information systems and remote learning and working are new norm amid covid 19 pandemic.
• Cyber risks are emerging and increasing.
• Preventative measures to safe-guard one’s information and privacy.
• All business activities are online and we are performing all our transactions using mobile apps and laptops.
• It reflects IT competency, IT knowledge and IT experience
• Helps to reduce efforts of proving equivalency of qualification in foreign land if you opt for immigration.
• Certification helps individuals to do self-business or start-up their own business.

• Online LIVE Instructor Led Training.
• Physical Classroom Training at our centers in Dubai.

• Exclusive batches are made and training is conducted on weekdays and weekend batches.
• Material access is been provided for study and reference.
• If any student misses out any physical class he can attend the same class in the next supplementary batch which we call it as make over classes.
• Practical and present challenges and situations shall be discussed and interacted with relevant solution and best practices in supply chain.

Cost: 2999 AED

Duration: 20 To 40 Hours

• Needs and tendencies
• Self construction
• Four planes of development
• Characteristics of child in second plane

• The elementary teacher
• The materials
• Other adults (assistant, experts)

• Cosmic education
• The pedagogical techniques (examples of lessons may be included)
• Role of teacher (transmitter of knowledge, inspiration)
• Class composition (mixed ages, sufficient children)
• Story telling/oral introductions (Great Stories/ other stories)
• Content knowledge (key lessons)
• Sensorial/imaginative presentations, leading to abstraction
• Develop imagination, leading to creativity
• Awareness of necessity for social/moral development
• Going Out (implementing the child's self construction)
• Other adults (there is more outside the classroom)

• Freedom as applied to child in elementary environment
• Responsibility as applied to child in elementary environment

• Manner of speaking to a child
• Appropriate direction for a child
• Manner of redirecting child

• Have regular meetings with the teacher
• Observation of the children that supports the work of the teacher/child
• Maintenance of the environment
• Ordering supplies
• Accompanying children on Going Outs
• Role Model for appropriate classroom behaviors (language, movement, activity)
• Maintain confidentiality

Cost: 12600 EGP

Duration: 60 Hours

Cost: 10000 USD

Duration: 1 Year

• Introduction to Montessori
• The Role of the Directress
• The Role of the Assistant
• Overview of the Planes of Development 0-24
• The Child's Mind from 0-6 Years
• Order
• Movement 0-3
• Language
• Independence
• Prepared Environment
• Freedom and Discipline
• Toilet Learning
• Observation
• Music and Art
• Maintaining the Environment
• Material Making Techniques

Cost: 14000 EGP

Duration: 60 Hours

• Area 1—Information Security Governance (24%)
• Area 2—Information Risk Management (30%)
• Area 3—Information Security Program Development and Management (27%)
• Area 4—Information Security Incident Management (19%)

Cost: 2799 AED

Duration: 20 To 40 Hours

Cost: 3299 AED

Discount: 20% Off for Laimoon Users!

Duration: 30 To 50 Hours

1. Learn the basics of Customer Relationship Management (CRM)
2. Understand the power of communication
3. Understand the customer’s lifecycle
4. Identify, segment and analyze customers
5. Analyze Customer’s Behavior
6. Handle Complaints efficiently
7. Understand the basics of Retention and building Loyalty
8. Learn more about Up-selling and Cross Selling
9. Apply key Performance Measurement techniques
10. Understand what is advocacy and learn how to be the customer’s advocate
11. Learn and apply key advocacy measurement techniques
12. Better engage Employees

1. The basics of Customer Relationship Management (CRM)
2. Understand the power of communication
3. Understanding the customer’s lifecycle
4. Analyzing and Understanding Customer’s Behavior
5. identifying, segmenting and analyzing customers
6. Handling Complaints
7. Retention and building Loyalty
8. Retention, Loyalty and Advocacy
9. Up-selling and Cross Selling
10. Performance Measurement
11. Engaging Employees

Cost: 2000 EGP

Duration: 2 Days

The course will empower the participants to deliver stunning speeches and presentations through delivering an exceptional experience to their audience whether prepared or impromptu.

Course Learning Outcome:

• Learn to design effective and engaging presentations/speeches
  
• Build instant rapport and get the audience on your side every time
  
• Master powerful and effective verbal and non-verbal communication techniques
  
• Present a variety of speeches (informative, persuasive, demonstrative, special occasion, etc.)
  
• Learn different tricks to add diversity and interest to engage the audience
  
• Learn how to give and receive feedback
  
• Feel confident and in control of being you
  

Course Content:

Planning and structuring a powerful speech/presentation

• Researching and planning for your speech/presentation.
  
• Producing clear and meaningful speeches on a given topic.
  
• Making statements and supporting point of views with convincing arguments.
  
• Analyzing topics' different angles and organizing ideas.

• Using humor.
  
• Using different interactive techniques.
  
• Mastering the storytelling technique.
  

Express to impress

• Demonstrate your energized vibrant voice.
  
• Using confident and expressive body language.
  
• Mastering the stage posture.

Discovering your key potentials as a speaker

• Discovering your unique side as a speaker.
  
• Learning how to make use of your potentials.

Controlling your speech anxiety

• Handling on spot speeches
  
• Handling difficult situations and audience
  
• Controlling stage freight

Training Methodology:

• Practical learning through application of different types of speeches/presentations, group discussions, interactive workshops and role plays.
  
• On spot professional evaluation.
  
• Practical assignments with challenging goals.
  

Who should attend?

• Professionals who usually perform presentations at their workplace or those who aim to promote their careers through creating a strong persuasive rapport with their audience.
  
• Professionals who have some experience in presenting and want to refine their skills taking them to the next level.
  
• Whether you are an experienced associate or at a senior level, this course is for you if you are looking to really engage and motivate your audience.
  

Cost: 4200 EGP

Duration: 4 Days

• Mastering Excel most important functions
  
• Analyzing Data and Alternative data sets
  
• Apply the key Excel functions to prepare data for analysis
  
• Apply advanced calculations 
  
• Create and customize pivot tables to reconcile and analyze accounts efficiently
  
• Utilize pivot tables functions and calculations to generate a set of management and business analysis reports
  
• Creating Advanced charts and graphics
  
• Changing workbook Appearance

Workshop Content:

Advanced Calculations on Data

• Creating Formulas to calculate value with functions (CountIf, SumIf, HLookup, VLookup, Aggregate, Concatenate)
• Performing Advanced Date & Time Calculations.

Advanced Format Tools

• Creating workbook from Template
  
• Add Header, Footer, and Setup Pages
  
• Naming group of data
  
• Advanced formatting cells 
  
• Advanced page setup
  
• Conditional Formatting
  
• Linking to office documents from a workbook
  
• Creating Advanced Chart and Sparkline's
  
•  Protect workbook and worksheet with Password

Analysis Tools

• Conditional Formatting
  
• Using Data Validation to create a drop-down list
  
• Filtering and sorting in table with Slicers 
  
• Finding and correcting an error
  
• Using watch window tool

Reporting Tools

• Analyze data by Pivot table and Pivot chart
  
• Using function (Getpivotdata)
  
• Using Consolidate tool
  
• Key functions to prepare data for pivot table reporting
  
• Creating and customising pivot tables
  
• Performing calculations within pivot tables
  

Cost: 850 EGP

Duration: 2 Days

Learning outcomes:

• Write effective emails, reports, and proposals
  
• Use rules for organizing content in a clear and concise manner
  
• Match writing complexity to the modern business environment
  
• Apply advanced structuring techniques in writing that yields a desirable response
  
• Identify and talk to their reader's interest.
  

ADVANCED TECHNIQUES FOR EFFECTIVE WRITING 

• Defining effective writing
  
• Characteristics of effective writers
  
• Understanding the hallmarks of effective communicators
  
• Elements of written communication
  
• Writing in a business context
  
• Understanding your audience
  
• Setting a purpose for your writing
  
• Understanding sources of miscommunication
  
• Tips for business writing
  

ORGANIZING CONTENT:

• The 3 forms of communication
  
• Using simple and specific language to avoid confusion
  
• Using positive language
  
• Applying rules for bullet points
  
• Maintaining an impersonal style
  
• Avoiding repetitions
  
• Using active verbs to promote a response
  

WRITING STYLE:

• Adding a personal touch to business writing
• Organizing paragraphs effectively
  
• Using varied sentences
  
• Recognizing clichés and jargon
  
• Applying the gunning fox index for writing complexity
  
• Using visual aids to support text
  
• Going the last inch: proof reading your work

LOGICAL SEQUENCING OF IDEAS:

• Building your key message
  
• Organizing the introduction, body and ending
  
• Structuring ideas from the bottom up
  
• Refining the flow from the top down
  
• Drawing impeccable conclusions
  
• Summarizing ideas effectively

RESPONDING TO COMPLEX SITUATIONS THROUGH WRITING:

• Building rapport with your audience
  
• Managing expectations: responding to bad news
  
• Managing expectations: saying no
  
• Effectively handing difficult individuals 
  
• Hostile: responding assertively 
  
• Pessimist: sticking to facts
  
• Nagger: setting the rules 
  
• Mr. Know-it-all: staying focused 
  
• Egoist: getting descriptive
  
• Manipulator: taking the initiative
  

Cost: 1400 EGP

Duration: 2 Days

1. Duration - 10 -12 Months
2. MBA Structure - 8 Courses + Research Methodology + Final Project/Other Criteria Based on Your Chosen University Requirements
3. Classes - Face to Face Weekend Classes with 18 - 20 Contact Hours in all Locations
4. Assessment - Assignment Based Courses
5. Payment - Pay as you Go - Flexible Monthly Instalments
6. Faculty - Fly in Professors from Europe UK and USA
7. Dual Certificate - Post Graduate Diploma from UK + MBA degree from Preferred UK University from the Provided List
8. Accreditation - Ministry of Higher Education in UK
9. Possible - To attend classes in UK, United Arab Emirates (UAE), Bahrain and All Locations
10. Graduation - Option of Attending Graduation in UK
11. Recorded Class Lecture Videos - Available
12. LMS - Complete access to Learning Management System + Access to ProQuest Online Library

1. Level 7 Diploma in Strategic Management and Leadership awarded by Qualifi
2. An MBA (top-up) awarded by a Recognized UK University.

Cost: 25286 SAR

Duration: 10 To 12 Months

1. Duration - 10 to 12 Months
2. MBA Structure - 8 Courses + Research Methodology + Final Project
3. Classes - Face to Face Weekend Classes with 18 - 20 Contact Hours in all Locations
4. Faculty - Fly in Professors from Europe UK and USA
5. Dual Certificate - Post Graduate Diploma from UK + MBA degree from Guglielmo Marconi University, Italy
6. Accreditation - Ministry of Higher Education in Italy. Also comes under the ENIC NARIC Approved Universities and is recognized worldwide.
7. Possible - To attend classes in Rome Italy, United Arab Emirates (UAE), Bahrain and All Locations
8. Assessment - Assignment Based Courses
9. Payment - Pay as you Go - Flexible Monthly Instalments
10. Graduation - Option of Attending Graduation in Rome, Italy
11. LMS - Complete access to Learning Management System + Access to ProQuest Online Library
12. Specializations Offered - Marketing + HR + Project Management + Supply Chain Management + HealthCare Management + Entrepreneurship + Finance

• Onsite Face to Face weekend classes
• Blended learning sessions
• Self-study models
• Online Live Interactive classes

• Assist in making successful career transitions, moving from technical specialization to general management.
• Assist in self-awareness as a manager & leader and in broad understanding of business and management issues
• Develop management skills and techniques and increase confidence in all areas of business
• Create opportunities for new career and possibilities for promotion.

Cost: 20000 SAR

Duration: 10 To 12 Months

Cost: 4700 EGP

Duration: 40 Hours

Cost: 4500 EGP

Duration: 2 Days

• Define what is risk and risk management
• Differentiate between risk and Enterprise risk management
• Define the three components of the ISO 31000:2018
• Illustrate the COSO ERM framework
• Illustrate how to perform the tasks of risk identification, analysis, response and   monitoring

• Basic definitions of risk, risk management and enterprise risk  management
• COSO ERM framework overview
• ISO 31000:2018 Framework overview
• Risk stakeholder
•  Case Study 1: Stakeholder Analysis Matrix
• Case Study 2: Stakeholder Persona
• Risk Management Plan components
• Case Study 2: Prepare your RMP

•  Risk Identification: how to prepare the risk register
• Case Study 3: Risk register
•  Risk Qualitative Analysis
•  Case Study 4: Risk Ranking
•  Risk Quantitative Analysis
•  Expected monetary value
•  Decision tree
•  Probability theory
•  Case Study 5: EMV case study
•  Case Study 6: Airline decision tree
•  Case Study 7: ABC decision tree