•  This training course is a comprehensive course to the technology of Design, Operation of Boilers and Performance as these most commonly used in the process and refinery industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO.
• For Boiler types, we focus on the mechanical and practical aspects.
• Many full details will be presented to get a full picture of Boiler technologies.
•  A basic training module for  Boilers Application and performance

• Understand The principle of Fire Tube and Water Tube Boiler design  
• Understand the principle of operation of ;
• Understand The principle of pressure vessels design          
• Understand Boilers Application and performance

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• ASME Section VIII pressure vessels
• ASTM A516 Grade 70 Plate is also called out as ASME SA516-70.
• A516 is primarily used for service in welded pressure vessels where improved notch toughness is required.

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation of Pumps, and Performance as these most commonly used in the process and refinery industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO. For Pumps types, we focus on the mechanical and practical aspects.
• Many case studies will be presented to show failures, to get a full picture of Pumps technologies.
•  A basic training module for other types of Pumps are included

• Understand The principle of  Pumps design
• Understand the principle of operation of Centrifugal, Reciprocating and Screw ;          
• Know Mechanical seal types,  Dry Gas Seals Design
• Understand Pumps Application and performance
• Understand Pumps standards and Codes

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 610  Centrifugal Pumps  for Petroleum, Chemical, and Gas Service Industries
• API 675 Positive Displacement Pumps - Controlled Volume
• API 676 Positive Displacement Pumps – Rotary  Pumps
• API 682 Pumps  Shaft Sealing Systems for Centrifugal and Rotary Pumps
• API 685 Seal less Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry
•  

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of  Project commissioning planning,
• Scheduling and resource management.
• Review and acceptance of Construction QA and Inspection and Test documentation.
• Ensuring Commissioning team is familiar with the project scope and requirements of the Commissioning Plan.
• Ensuring Operations knowledge and approval of the Commissioning scope. Facilitating coordination meetings with Operations.
• Providing the communication interface with the stakeholders (Engineering, constructions,-----
• Facilitating site Hazard Assessment,

• Know the key elements of project   Commissioning
• Apply the  Commissioning Management and Organization Chart
• Understand and review Project Phases
• Know and apply the Pre Commissioning, Commissioning and Start-up 
• Prepare Check –Lists
• Prepare Check -Lists
• Review the As-Built P&IDs
• Equipment Data Sheets
• Updated Operating Procedures
• Review Construction & Generate Punch-Lists

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• Asme section ix - b ,  - Asme   b , - Asme   b , Asme , Asme ,ASME , ASME ,Api 1104, Api 570, Astm, Ansi.
• API 617 Centrifugal Compressors for Petroleum, Chemical and Gas
• Guidance on Industry Standard for ISO 13707 Reciprocating Compressors (API 618)
• GIS 34-503 Guidance on Industry Standard for ISO 10441 Special Purpose Couplings
• Gas Seal Systems (API 614).
• GIS 34-303 Guidance on Industry Standard for API 616 Gas Turbine
• GS 134-6 Reciprocating Compressors to API 618
• ASME PTC 9 Displacement Compressors, Vacuum Pumps, and Blowers.
• Guidance on Industry Standard for API 619 Rotary Type Positive Displacement Compressors
• A RE-COMP-619-P Rotating Equipment—Compressors—API 619 Rotary—Procurement
• Guidance on Industry Standard for API 681 Liquid Ring Vacuum Pumps and Compressors
• API 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; ISO 13709 Adoption

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation of   Pressure Vessels, Heat Exchangers, Tanks, Valves and Filters and Performance as these most commonly used in refinery and oil and gas industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO.
• And specify the proper material; we focus on the mechanical and practical aspects.
• Many case studies will be presented to show failures, to get a full picture of   Pressure Vessels, Heat Exchangers, Tanks, Valves and Filters technologies.

• Understand The principle of  Pressure Vessels, Heat  Exchangers , Tanks, Valves and Filters design  
• Understand the principle of operation of Pressure Vessels, Heat Exchangers, Tanks, Valves and ;  
• Understand   Pressure Vessels, Heat Exchangers, Tanks, Valves and Filters design  application and performance
• Understand  How to apply Maintenance and tests of  Pressure Vessels, Heat Exchangers , Tanks, Valves and Filters 

• Mechanical, Production Senior Technicians
• New Engineers
• Senior Engineers,
• Process Engineers,
• Section Heads,

• ASME Section VIII pressure vessels
• API 660 - Shell and Tube
• API 661 - Air Cooled Heat Exchangers
• API 662 - Plate and Frame

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Design, Operation and Maintenance of Gas Turbine Performance maintenance practices as these most commonly used in the process and refinery industries.
• The course will provide details on mechanical design and maintenance in relation with international standards as API and ISO. For Gas Turbine, we focus on the mechanical and practical aspects.
• Many case studies will be presented to show failures, to get a full picture of Gas Turbine
• Provide details of Alignment Preparation check list and How to Check Alignment procedures of rotary Equipment.

• Apply Mechanical Maintenance of Gas Turbine
• Understand the principle of operation of Gas Turbine
• Understand Gas Turbine Application 
• Understand Gas Turbine Standards and Codes
• Understand  Centrifugal , Axial flow  anti- surging systems
• Understand  compressors Standards and Codes
• Understand Alignment Preparation check list and How to Check Alignment procedures of rotary Equipment.

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 617 Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
• API  STD 616     Gas Turbines for Petroleum,  Chemical, and Gas Industry Services
• API   RP 11PGT  Recommended Practice for  Packaged Combustion Gas Turbine           

Cost: 2200 USD

Duration: 4 Days

•  This training course is a simplified course of Maintenance of plant Equipment and Machinery
•  The course will provide details on Managing and Coordinating All maintenance of rotary and stationary equipment activities.
• Preparation and implementation of preventive and conditional maintenance programs
• A case studies will be presented and how to manage the optimum solution to apply Equipment maintenance with the maximum safety conditions and practical aspects.
• Providing the Types of Couplings, Alignment Preparation check list
• How to Check Alignment procedures of rotary Equipment.

• Know and apply Preventive & Corrective Maintenance Integration
• Know the plant Maintenance Strategies
• Review the Stationary equipment Process Performance
• Review the Rotary equipment Process Performance
• Know and apply Proactive and predictive Maintenance
• Reliability Centered Maintenance (RCM)
• Know Maintenance Philosophy
• Know  and apply Computer Maintenance Management( CMM )
• How to Check Alignment procedures of rotary Equipment.

• Mechanical, Production Senior Technicians
• New Engineers
• Senior Engineers,
• Process Engineers,
• Section Heads,

Cost: 2500 USD

Duration: 5 Days

• Understand The principle of Fire Tube and Water Tube Boiler design  
• Understand the principle of operation of ;
• Understand The principle of pressure vessels design          
• Understand Boilers Application and performance

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• ASME Section VIII pressure vessels
• ASTM A516 Grade 70 Plate is also called out as ASME SA516-70.
• A516 is primarily used for service in welded pressure vessels where improved notch toughness is required.

Cost: 1100 USD

Duration: 3 Days

• New Engineers ((Mechanical)
• Senior maintenance supervisors,
• Design Engineers,
• Process Engineers,
•  Section Heads
• Department Heads

Cost: 2500 USD

Duration: 5 Days

• Understand Mechanical seals types
• Understand The principle of operation of the  Dry Gas Seals 
• Know Dry Gas Seals Design and the forces acting upon the seal in operation               
• Know Benefits of using instead of Traditional oil sealing                  
• Understand Hydraulic Balancing mechanical seals

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

Cost: 2200 USD

Duration: 4 Days

• Apply analysis techniques used to investigate and resolve reliability-related problems.
• Understand the basic methodology for conducting a root cause failure analysis (RCFA).
• Understand R C A  Analysis and Break Breakthrough Strategy
• Know  Equipment Design and Troubleshooting Evaluation Guide
• Apply precisely Rotary Equipment  Alignment  using the standard software  

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• Mobley, R. Keith, 1943 –
• Root cause failure analysis / by R. Keith Mobley.
• Includes index.
• ISBN (alk. paper) 

• Post assessment

Cost: 2500 USD

Duration: 5 Days

• Understand The principle of  Pumps design
• Understand the principle of operation of Centrifugal, Reciprocating and Screw ;          
• Know Mechanical seal types,  Dry Gas Seals Design
• Understand Pumps Application and performance
• Understand Pumps standards and Codes

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 610  Centrifugal Pumps  for Petroleum, Chemical, and Gas Service Industries
• API 675 Positive Displacement Pumps - Controlled Volume
• API 676 Positive Displacement Pumps – Rotary  Pumps
• API 682 Pumps  Shaft Sealing Systems for Centrifugal and Rotary Pumps
• API 685 Seal less Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry

Cost: 2500 USD

Duration: 5 Days

• Understand Mechanical seals types
• Understand The principle of operation of the  Dry Gas Seals                
• Know Dry Gas Seals Design and the forces acting upon the seal in operation               
• Know Benefits of using instead of Traditional oil sealing                  
• Understand Hydraulic Balancing mechanical seals                                                 

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

Cost: 2500 USD

Duration: 5 Days

• Know and apply Preventive & Corrective Maintenance Integration
• Know the plant turnaround  maintenance programs
• Review the Stationary equipment Process Performance
• Review the Rotary equipment Process Performance
• Know and apply Proactive and predictive Maintenance
• Reliability Centered Maintenance (RCM)
• Know Maintenance Philosophy
• Know  and apply Computer Maintenance Management( CMM )
• Know how to Do perfect  rotary  Equipment Alignment ,

• Production  Senior Technicians
• Maintenance  Senior Technicians  
• New Engineers
• Senior Engineers,
• Process Engineers,
• Section Heads,

Cost: 2500 USD

Duration: 5 Days

• Understand the major parameters affecting the Compressors selection
• Understand The principle of operation of Centrifugal , Axial flow, Reciprocating and Screw ;          
• Know Mechanical seal types,  Dry Gas Seals Design
• Understand  Centrifugal , Axial flow compressors  surging  phenomenon
• Understand  Centrifugal , Axial flow  anti- surging systems
• Understand  compressors Standards and Codes

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• API 617 Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
• API 618 Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services
• API 619 Rotary Compressors for Petroleum, Petrochemical, and Gas Industry Services
• API 681 Liquid Ring Vacuum Compressors for Petroleum,  Petrochemical, and Gas Industry

Cost: 2500 USD

Duration: 5 Days

•  This training course is a comprehensive course to the technology of Project commissioning planning, Scheduling and resource management.
• Review and acceptance of Construction QA and Inspection and Test documentation.
• Ensuring Commissioning team is familiar with the project scope and requirements of the Commissioning Plan.
• Ensuring Operations knowledge and approval of the Commissioning scope. Facilitating coordination meetings with Operations.
• Providing the communication interface with the stakeholders (Engineering, constructions, -----
• Facilitating site Hazard Assessment,

• Know the key elements of project Commissioning
• Apply the Commissioning Management and Organization Chart
• Understand and review Project Phases
• Know and apply the Pre-Commissioning, Commissioning and Start-up 
• Prepare Check –Lists
• Prepare Check -Lists
• Review the As-Built P&IDs
• Equipment Data Sheets
• Updated Operating Procedures
• Review Construction & Generate Punch-Lists

• New Engineers ((Mechanical, Production, Instrumentation)
• Senior Engineers,
• Process Engineers,
• Section Heads,
• Department Heads

• Asme section ix - b ,  - Asme   b , - Asme   b , Asme , Asme ,ASME , ASME ,Api 1104, Api 570, Astm, Ansi.
• API 617 Centrifugal Compressors for Petroleum, Chemical and Gas
• Guidance on Industry Standard for ISO 13707 Reciprocating Compressors (API 618)
• GIS 34-503 Guidance on Industry Standard for ISO 10441 Special Purpose Couplings
• Gas Seal Systems (API 614).
• GIS 34-303 Guidance on Industry Standard for API 616 Gas Turbine
• GS 134-6 Reciprocating Compressors to API 618
• ASME PTC 9 Displacement Compressors, Vacuum Pumps, and Blowers.
• Guidance on Industry Standard for API 619 Rotary Type Positive Displacement Compressors
• A RE-COMP-619-P Rotating Equipment—Compressors—API 619 Rotary—Procurement
• Guidance on Industry Standard for API 681 Liquid Ring Vacuum Pumps and Compressors
• API 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; ISO 13709 Adoption

Cost: 2500 USD

Duration: 5 Days

• Gas density and temperature effects
• Gas and condensate densities and pressure effect
• Vapor pressure
• Viscosity

• Standard and Codes
• Head Loss Equivalents

• Valves types and selection criteria.

• Standards and Codes
•   Centrifugal Compressor Properties
•   Compressor Selection
• Compressors componen

• Abbreviations & Specifications
• Piping specifications.
• Process piping arrangements.
• Compressors troubleshooting

• Pressure vessel types, 
• Basic components, and applications;
• Design codes, standards and specifications
• Vessel Shells
• Heads
• Nozzle openings and reinforcement
• Flanges, Supports, Internals
• Horizontal Volume Shell, head, calculations
• Spheres Volume, calculations

Cost: 2500 USD

Duration: 5 Days

• Oil density and temperature effects
• Gas and condensate densities and pressure effect
• Flash point
• Vapor pressure
• Viscosity

• Pumps Types
• Code and Standards
• Function Of Pumps
• Centrifugal pumps Performance curve
• Rotary Pump
• Reciprocating Pumps

• Abbreviations & Specifications
• Piping specifications.
• Process piping arrangements.
• Pumps troubleshooting

• Tank Types.
• Tanks Standards
• Fixed-roof tank
• Floating Roof
• Tanks piping fitting
• Tank Mixers Arrangement
• Pressure/Vacuum Valves

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

• Tanks types.
• Tank Standards – General.
• Storage Tanks Symbols
• Fixed-roof tanks
• Floating Roofs
• Major Design Criteria
• Refrigerated Storage
• Tanks piping fitting classification

• Tank bottoms.
• Tank Shells.
• Tank Roofs.
• Venting Of Fixed-Roof Tanks
• Air Baffles
• Pressure/Vacuum Valves
• Automatic Bleeder Vents
• Internal Floating Covers (IFC).
• Tank Pads.
• Bund Walls.
• Pressure/Vacuum Valves                     

• Maintenance HSE General Requirement
• External Maintenance of Tanks.
• Internal Maintenance of Tanks.
• External and Internal Painting
• Fiber Glass Lining
• Tank Cleaning
• Fiber Glass Lining
• Tank Cleaning
• Safe Sludge Cleaning
• Tank Mixers Arrangement
• Equipment performance Indicator

• Explosive Air/Vapor Mixture.
• Ignition Sources.
• Static Electricity
• Pyrophoric Iron Sulphide
• Spark Formation By Striking Of Metal Objects
• Tank Testing
• Cathodic Protection

Cost: 2500 USD

Duration: 5 Days

Cost: 2200 USD

Duration: 4 Days

• Discusses various factors influencing the design of a pressure vessel
• Material selection Pressure Temperature Corrosion allowance Stress
• Vessel orientation Weld joint efficiencies

• Lists and steps in the design process of each component of a pressure vessel Shells
• Heads
• Stiffening rings
• Nozzle openings and reinforcement
• Flanges, Supports, Internals

• Describes the role of the engineer in preparing purchasing specifications,
• methods for testing pressure vessels, and types of vessel certification

• Simple calculations for pressure vessels design
• Process requirements
• Horizontal Volume Shell, head, calculations
• Spheres Volume, calculations
• Heat Exchangers types
• TEMA standard

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

1. Aircraft propulsion,
2. Oil and gas pipeline pumping
3. Offshore  platforms
4. Utility  power  generation
5. Ship  propulsion
6. Equipment Prime mover

1. Air in the compressor stages.
2. How pressure buils up through the compressor stages.
3. Flue gas in the turbine stages.
4. Air in the combustion chamber

1. Gas Turbine Thrust balance
2. Bearings

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

• Principle of operation
• Packing seals and its disadvantages      
• Mechanical seal types
• Mechanical seal function and component
• Hydraulic Balance

• Quenching
• Flushing
• Circulation
• Barrier fluid
• Ancillaries

• Preparation
• Precautions
• Checks
• Measurements

• Principle of operation
• Design
• Operating concept and precautions
• Self adjusting theory
• Auxiliaries

Cost: 2500 USD

Duration: 5 Days

•  Compressor Properties
• Compression Theory
• Compressor Selection
• Compressors components
• Compressor Operation

• Positive Displacement Compressor
• Reciprocating Compressors
• Rotary Compressor

Cost: 2500 USD

Duration: 5 Days

Cost: 2500 USD

Duration: 5 Days

• Horizontal Flow Regimes
• Vertical Flow Regimes
• Erosional Velocity
• Calculating Pressure Drop

Cost: 1750 USD

Duration: 4 Days

Cost: 1800 EGP

Duration: 5 Days

• Basic Fundamentals of Fluid Power
• Graphic Symbols and Drawings
• Filtration
• Control Valves
• Pump and Motion
• Directional Valves
• Maintenance Troubleshooting
• Hoses and Connector
• Practical Session

Cost: 700 EGP

Duration: 5 Days

Cost: 1800 EGP

Duration: 3 To 5 Days