Cisco ONS 15454 Multiservice Transport Protocol (MSTP) from Installation to Protection

Course details

Overview:

The Cisco® ONS 15454 MSTP from Installation to Protection Release 9.6 is a lab-intensive course. You will learn the skills necessary to deploy a Cisco Optical Networking System (ONS) 15454 Multiservice Transport Platform (MSTP) network from installation to protection (FITP).

You will also learn fiber-cleaning techniques, fiber test requirements, and how to perform node turnup. The course covers three shelf types: the M12, M6, and M2. You will learn to deploy linear and ring densewavelength-pision multiplexing (DWDM) topologies. The course covers multiplexer/demultiplexer cards, Erbium doped fiber amplifier cards, Raman amplifiers, transponder cards, and the newest Cisco any rate muxponder and crossponder cards. These cards are used in terminal, amplifier, and reconfigurable optical add-drop multiplexer (ROADM) node configurations. You will configure wavelength selective switch (WSS) rings and single-module ROADM (SMR) rings. This MSTP-FITP course covers 10-Gigabit unprotected circuits and 10-Gigabit protection using Y-cable, optical channel transport unit-2 (OTU-2), and protection switch module (PSM) cards

Objectives:

• After completingthis course, you should be able to:
• Connect and configure a Cisco ONS 15454 MSTP chassis
• Identify node configurations according to card population
• Provision DWDM circuits using the Cisco Transport Controller
• Conduct performance monitoring, alarm verification, and fault isolation
• Provision M12 WSS and M6 SMR nodes in ring topologies
• Understand configuration options for the any rate muxponder/crossponder
• Perform Raman amplifier initialization
• Isolate optical network issues

Content:

• Module 1: Cisco ONS 15454 MSTP Product Overview
• Module 2: DWDM Fundamentals
• Module 3: Optical Networking System Safety
• Module 4: Optical Fiber and Cleaning
• Module 5: DWDM Test Equipment
• Module 6: Shelf Layout and Components
• Module 7: Documentation
• Module 8: Cisco Transport Controller Operations
• Module 9: MSTP Topologies
• Module 10: Shelf and Card Installation
• Module 11: System Setup
• Module 12: Linear Configurations
• Module 13: Node Turnup
• Module 14: Optical Channel Network Connection Circuits
• Module 15: Transponder and Optical Channel Client Connection Circuits
• Module 16: Multishelf
• Module 17: MSTP Rings
• Module 18: MSTP M6 SMR-Based Rings
• Module 19: 10-Gigabit Muxponder and Transponder Cards
• Module 20: 10-Gigabit with Y-Cable Protection
• Module 21: Alternative 10-Gigabit Protection
• Module 22: Any Rate Muxponder and Crossponder
• Module 23: Raman Amplifier
• Module 24: 40- and 100-Gigabit Transponder and Muxponder
• Module 25: Troubleshooting
• Labs