Easy Learn Training Institute Electrical Transient Analysis program (ETAP) Easy Learn Training Institute
السعر: 681 USD
تدريب إفتراضي أونلاين. المحاضرات قد تكون فردية أو ضمن مجموعة.
  • كتيب الدورة: تحميل
  • مدة الدورة التدريبية: 24 ساعة
  • مواعيد الدورة: استفسار

    تفاصيل الدورة

    Course Introduction:
     
     Electrical Transient Analyzer Program (ETAP) is an electrical network modeling and       simulation software tool used by power systems engineers to create an "electrical digital twin" and analyze electrical power system dynamics, transients and protection.
     
    Power System Analysis means verifying the adequacy of the power distribution system and its components recognize coordination related disturbances and outages and collecting the required data to perform a detailed required study.
     
    Course Objectives:
     
    On successful completion of this course, participants will be able to:
     Understand importance of power system modeling
     Understand the need for calculation the short circuit current.
     Manual calculation of short circuit using simple methods like MVA method, system,      etc…
     Balanced & unbalanced power flow analysis.
     Voltage drops & Cable sizing.
     Transformer MVA Sizing.
     Analyze the motor starting/acceleration either static or dynamic.
     Switchgear rating (breaking & making capacities).
     Importance of arc flashing and relay co-ordination studies from operation & safety point of
    View.
     Design of S/S grid earthling using ETAP.
     Test cases simulation using computer software’s (ETAP ).
     exploring the powerful capabilities of ETAP Power Station from OTI.
     
     
    ELECTRICAL SYSTEM DESIGN
    Syllabus
    Module-1 System Planning
    Basic Design Consideration
    Planning guide for the supply and distribution system
    Power System modernization and evaluation studies
    Voltage consideration
    Voltage control in Electric power system
    Voltage selection
    Voltage drop consideration in locating the low voltage/High Voltage
    Calculation of Voltage drop
     
     
    Module-2 Cost Estimation of Industrial Power systems
    Preparing the cost estimate
    Equipment’s & Materials cost
    Installation Cost
    Other cost
     
     
    Module-3 Lighting Design
    Different entities of illuminating system, Light Source :Day light ,Incandescent, electrica Discharge, Fluorescent, ArcLamp,
    Luminaries, Wiring, Switching & Control Circuits
    Laws Of Illumination; Illumination from Point,Line and Surface sources Photometry
    Interior Lighting: Industrial ,Residential, Office departmental stores ,Indoor Stadium, Theater and Hospitals.
    Exterior Lighting: Flood, Street, Aviation & Transport Lighting
    Utility service for Large building/Office /Complex
     
     
    Module-4 Cable Sizing and Selections Of single phase and three phase
    Load Details Calculations
    Cable type and construction features
    Site Installation condition
    Cable Selection Based on Current rating of feeder
    Installation Current rating of cable
    Feeder load details
    Motor Load details.
    Voltage Drop of Cable
    Cable Impedance value
    Maximum permissible Voltage drop by ANSI and IEC etc.
    Calculation Maximum Cable length due to voltage drop
    Short circuit Temp. Rise calculation of cable.
     
     
     
    Module-5 Earthing Design and Calculation of Power Plants
    Factors Influencing the choice of Earthed and Unearthed system
    System earthing & equipment Earthing Connection to earth
    Resistance to Earth and Earth Electrode Current desnsity at the surface of an Earth Electrode
    Selection of an Earthing conductor and connection of Earth Electrode
    Earthing of all Electrical equipments
    Step Voltage ,touch voltage
    Calculation of Maximum step and Mesh Voltage
    Std. Ref. IS,IEC,IEEE,BS
    IEEE std 80-2000 guide for safety AC grounding Etc.
     
     
    Module-6 Design And Engineering Of Transmission Line
    Transmission Planning
    Indian Electricity Rules and State Regulation for transmission line
    Choice of route of transmission line
    Selection of conductors of overhead transmission line
    Spacing of conductors in transmission line
    Calculation of SAG and Tension
    OVER head transmission clearance
    Choice of Span
    Etc.
    Module-7 Design and Engineering Of Switchyard
    Selection of Projects-Classification –Zone area wise
    Electrical Clearance
    Insulation Coordination calculation of equipments
    Outdoor Substation Layout
    Control Room Layout
    Types of Bus bar schemes of substation
    Substation main equipments
    Sizing of transformer
    Reactive Compensation Equipments
    Selection and sizing of Voltage transformer
    Selection and sizing of current transformer
    HT/LT CB sizing
    Control and Relay Panels
    Selection and sizing of Isolators
    Selection and sizing of Lightening Protection
    Selection and sizing of Insulators
    Battery Sizing, UPS sizing
    Cable and Conductors sizing
    Capacitors bank; power factor improvements technique
    Sizing Filters
     
     
    DRAWINGS
     
    Electricals Layouts
    Electrical Symbols Abbreviation standard legends
    Single and 3 Line diagram
    Earthing layouts
    Substation layout
     
     
    CASE STUDY (Using Etap Software)
     
    Preparation of single Line diagram
    Load Flow Analysis
    Short circuit analysis
    Harmonics analysis
    Stability Analysis etc.
     
     
     
     
     
      تحديث بتاريخ 24 July, 2024

    المتطلبات

    Educational Qualification: A background in Electrical Engineering or a related field.Knowledge Base: Basic understanding of electrical circuits and systems.Computer Literacy: Comfort with using computers and software applications.Analytical Skills: Ability to analyze data and solve engineering problems.Interest: Genuine interest in power system modeling, simulation, and analysis.

    نبذة عن معهد Easy Learn Training Institute

    EASY LEARN TRAINING INSTITUTE is a Professional developing institute. It is an innovator and leader in human capital development, providing world-class experiential corporate training solutions and language training services in English as well as top class IT skill development. EASY LEARN TRAINING INSTITUTE is amongst the leading training institutes in Dubai that currently offers training courses in not just language proficiency but also in many academic and information technology based courses under the guidance of skilled teachers.

    Our training courses aid all our students and clients to gain hands-on skills during the sessions, ensuring that knowledge is truly gained and retained. Our experiential and practical corporate training solutions have impacted some highly respectable companies so far, and the number is increasing by the day. From all aspects of English language training such as IELTS, TOEFL to academic training of much more competitive level such as GRE, GMAT and numerous computer certifications; EASY LEARN TRAINING INSTITUTE has what it takes to be regarded as a place where careers are forged. Our qualified and experienced team of Master Trainers travels across the region to bring training courses to students of any level.

    عرض الجميع دورات Easy Learn Training Institute

    يمكنك إضافة المزيد من الدورات التدريبية هنا.
    سيتم حفظ القائمة.

    قيِم هذه الصفحة